| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Replaces every way of handling config for each frontend with SimpleIni. frontend_common's Config class is at the center where it saves and loads all of the cross-platform settings and provides a set of pure virtual functions for platform specific settings.
As a result of making config handling platform specific, several parts had to be moved to each platform's own config class or to other parts. Default keys were put in platform specific config classes and translatable strings for Qt were moved to shared_translation. Default hotkeys, default_theme, window geometry, and qt metatypes were moved to uisettings. Additionally, to reduce dependence on Qt, QStrings were converted to std::strings where applicable.
|
|
|
|
Without this, the Reset All Settings button would be selected by default
|
|
This gets rid of some repeated code and sets us up to send more
information to the new widget.
|
|
|
|
Makes comboboxes always correspond to the value of the setting they're
modifying.
|
|
Needs a considerable amount of management specific to some of
the comoboboxes due to the audio engine configuration.
general: Partial audio config implmentation
configure_audio: Implement ui generation
Needs a considerable amount of management specific to some of
the comoboboxes due to the audio engine configuration.
general: Partial audio config implmentation
settings: Make audio settings as enums
|
|
|
|
This leaves per-game config's General tab empty?
|
|
|
|
We can iterate through the AdvancedGraphics settings and generate the UI
during runtime. This doesn't help runtime efficiency, but it helps a ton
in reducing the amount of work a developer needs in order to add a new
setting.
|
|
Tabs that largely configure SwitchableSetting's are now Tabs and grouped
together.
|
|
Loading it when the configuration opens now incurs a noticeable delay.
We also don't need to rediscover the same data repeatedly each time the
configuration opens.
Moves vulkan device info discovery to yuzu's startup as opposed to the
configure_graphics constructor.
|
|
This option is only visible if an Intel GPU using the proprietary
driver is found during Vulkan device enumeration.
configure_graphics: More directly get driver id
Vulkan::Device does quite a bit more than we need just to see the
driver ID here.
|
|
Sets the AA_DisableWindowContextHelpButton attribute to disable this useless button globally.
|
|
[REUSE] is a specification that aims at making file copyright
information consistent, so that it can be both human and machine
readable. It basically requires that all files have a header containing
copyright and licensing information. When this isn't possible, like
when dealing with binary assets, generated files or embedded third-party
dependencies, it is permitted to insert copyright information in the
`.reuse/dep5` file.
Oh, and it also requires that all the licenses used in the project are
present in the `LICENSES` folder, that's why the diff is so huge.
This can be done automatically with `reuse download --all`.
The `reuse` tool also contains a handy subcommand that analyzes the
project and tells whether or not the project is (still) compliant,
`reuse lint`.
Following REUSE has a few advantages over the current approach:
- Copyright information is easy to access for users / downstream
- Files like `dist/license.md` do not need to exist anymore, as
`.reuse/dep5` is used instead
- `reuse lint` makes it easy to ensure that copyright information of
files like binary assets / images is always accurate and up to date
To add copyright information of files that didn't have it I looked up
who committed what and when, for each file. As yuzu contributors do not
have to sign a CLA or similar I couldn't assume that copyright ownership
was of the "yuzu Emulator Project", so I used the name and/or email of
the commit author instead.
[REUSE]: https://reuse.software
Follow-up to 01cf05bc75b1e47beb08937439f3ed9339e7b254
|
|
|
|
|
|
Reported by GillianMC on Discord. Looks to be a small quirk in the QT API.
setText(QObject::tr(status.text));
bringing up QObject breaks the link with the GameListItemCompat
|
|
|
|
All other dialog types we have use CamelCase naming.
|
|
|
|
ui: fix crash when closing configure window
|
|
This crash happens 100% of the time (on Linux at least), you just need
to open the configure window and click OK.
It seems to happen when the tabs are destroyed and once all the tabs are
destroyed, a final signal is sent with `index == -1`. So `debug_tab_tab`
doesn't exist anymore when this happens, so the crash.
|
|
|
|
|
|
This commit renames the "Services" tab to "Network" and adds a combobox that allows the user to select the network interface that yuzu should use. This new setting is now used to get the local IP address in Network::GetHostIPv4Address. This prevents yuzu from selecting the wrong network interface and thus using the wrong IP address. The return type of Network::GetHostIPv4Adress has also been changed.
|
|
Decouples the CPU debugging mode from the enumeration to its own
boolean. After this, it moves the CPU Debugging tab over to a sub tab
underneath the Debug tab in the configuration UI.
|
|
Also makes use of std::move, and performs a clang-format cleanup.
This addresses review comments.
Co-authored-by: LC <mathew1800@gmail.com>
|
|
Builds on german77's work to reset all settings back to their defaults.
This include UISettings and Settings values structs, but does not affect
save profiles, input profiles, and game directories.
This works from a button input in configure_general. When activated, it
calls a callback to close the whole configure dialog, then GMainWindow
deletes the old configuration, both on disk and in memory, and
reinitalizes a new one. It also resets a portion of the UI and calls the
telemetry window prompt.
|
|
Most of the code already exists to do this, but the Apply button itself
was never added. This adds a button and boolean that tells yuzu to save
the configuration after applying settings, even if close/Cancel is
pressed on the dialog. Changes after applying will not be saved when
Cancel is pressed, though.
|
|
- Removes a dependency on core and input_common from common.
|
|
Removes two unused variables in out Qt code. In this case the removal of
these two results in less allocations, given std::map allocates on the
heap.
|
|
Removes all remaining usages of the global system instance. After this,
migration can begin to migrate to being constructed and managed entirely
by the various frontends.
|
|
Rather than have directly modified global state here, we can make it an
implementation detail and have an interface that changes are queried
through.
|
|
Abstracts most of the input mechanisms under an InputSubsystem class
that is managed by the frontends, eliminating any static constructors
and destructors. This gets rid of global accessor functions and also
allows the frontends to have a more fine-grained control over the
lifecycle of the input subsystem.
This also makes it explicit which interfaces rely on the input subsystem
instead of making it opaque in the interface functions. All that remains
to migrate over is the factories, which can be done in a separate
change.
|
|
Co-authored-by: James Rowe <jroweboy@gmail.com>
Co-authored-by: Its-Rei <kupfel@gmail.com>
|
|
Co-Authored-By: Weiyi Wang <wwylele@gmail.com>
|
|
|
|
|
|
* Switch game settings to use a pointer
In order to add full per-game settings, we need to be able to tell yuzu to switch
to using either the global or game configuration. Using a pointer makes it easier
to switch.
* configuration: add new UI without changing existing funcitonality
The new UI also adds General, System, Graphics, Advanced Graphics,
and Audio tabs, but as yet they do nothing. This commit keeps yuzu
to the same functionality as originally branched.
* configuration: Rename files
These weren't included in the last commit. Now they are.
* configuration: setup global configuration checkbox
Global config checkbox now enables/disables the appropriate tabs in the game
properties dialog. The use global configuration setting is now saved to the
config, defaulting to true. This also addresses some changes requested in the PR.
* configuration: swap to per-game config memory for properties dialog
Does not set memory going in-game. Swaps to game values when opening the
properties dialog, then swaps back when closing it. Uses a `memcpy` to swap.
Also implements saving config files, limited to certain groups of configurations
so as to not risk setting unsafe configurations.
* configuration: change config interfaces to use config-specific pointers
When a game is booted, we need to be able to open the configuration dialogs
without changing the settings pointer in the game's emualtion. A new pointer
specific to just the configuration dialogs can be used to separate changes
to just those config dialogs without affecting the emulation.
* configuration: boot a game using per-game settings
Swaps values where needed to boot a game.
* configuration: user correct config during emulation
Creates a new pointer specifically for modifying the configuration while
emulation is in progress. Both the regular configuration dialog and the game
properties dialog now use the pointer Settings::config_values to focus edits to
the correct struct.
* settings: split Settings::values into two different structs
By splitting the settings into two mutually exclusive structs, it becomes easier,
as a developer, to determine how to use the Settings structs after per-game
configurations is merged. Other benefits include only duplicating the required
settings in memory.
* settings: move use_docked_mode to Controls group
`use_docked_mode` is set in the input settings and cannot be accessed from the
system settings. Grouping it with system settings causes it to be saved with
per-game settings, which may make transferring configs more difficult later on,
especially since docked mode cannot be set from within the game properties
dialog.
* configuration: Fix the other yuzu executables and a regression
In main.cpp, we have to get the title ID before the ROM is loaded, else the
renderer will reflect only the global settings and now the user's game specific
settings.
* settings: use a template to duplicate memory for each setting
Replaces the type of each variable in the Settings::Values struct with a new
class that allows basic data reading and writing. The new struct
Settings::Setting duplicates the data in memory and can manage global overrides
per each setting.
* configuration: correct add-ons config and swap settings when apropriate
Any add-ons interaction happens directly through the global values struct.
Swapping bewteen structs now also includes copying the necessary global configs
that cannot be changed nor saved in per-game settings. General and System config
menus now update based on whether it is viewing the global or per-game settings.
* settings: restore old values struct
No longer needed with the Settings::Setting class template.
* configuration: implement hierarchical game properties dialog
This sets the apropriate global or local data in each setting.
* clang format
* clang format take 2
can the docker container save this?
* address comments and style issues
* config: read and write settings with global awareness
Adds new functions to read and write settings while keeping the global state in
focus. Files now generated per-game are much smaller since often they only need
address the global state.
* settings: restore global state when necessary
Upon closing a game or the game properties dialog, we need to restore all global
settings to the original global state so that we can properly open the
configuration dialog or boot a different game.
* configuration: guard setting values incorrectly
This disables setting values while a game is running if the setting is
overwritten by a per game setting.
* config: don't write local settings in the global config
Simple guards to prevent writing the wrong settings in the wrong files.
* configuration: add comments, assume less, and clang format
No longer assumes that a disabled UI element means the global state is turned
off, instead opting to directly answer that question. Still however assumes a
game is running if it is in that state.
* configuration: fix a logic error
Should not be negated
* restore settings' global state regardless of accept/cancel
Fixes loading a properties dialog and causing the global config dialog to show
local settings.
* fix more logic errors
Fixed the frame limit would set the global setting from the game properties
dialog. Also strengthened the Settings::Setting member variables and simplified
the logic in config reading (ReadSettingGlobal).
* fix another logic error
In my efforts to guard RestoreGlobalState, I accidentally negated the IsPowered
condition.
* configure_audio: set toggle_stretched_audio to tristate
* fixed custom rtc and rng seed overwriting the global value
* clang format
* rebased
* clang format take 4
* address my own review
Basically revert unintended changes
* settings: literal instead of casting
"No need to cast, use 1U instead"
Thanks, Morph!
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
* Revert "settings: literal instead of casting
"
This reverts commit 95e992a87c898f3e882ffdb415bb0ef9f80f613f.
* main: fix status buttons reporting wrong settings after stop emulation
* settings: Log UseDockedMode in the Controls group
This should have happened when use_docked_mode was moved over to the controls group
internally. This just reflects this in the log.
* main: load settings if the file has a title id
In other words, don't exit if the loader has trouble getting a title id.
* use a zero
* settings: initalize resolution factor with constructor instead of casting
* Revert "settings: initalize resolution factor with constructor instead of casting"
This reverts commit 54c35ecb46a29953842614620f9b7de1aa9d5dc8.
* configure_graphics: guard device selector when Vulkan is global
Prevents the user from editing the device selector if Vulkan is the global
renderer backend. Also resets the vulkan_device variable when the users
switches back-and-forth between global and Vulkan.
* address reviewer concerns
Changes function variables to const wherever they don't need to be changed. Sets Settings::Setting to final as it should not be inherited from. Sets ConfigurationShared::use_global_text to static.
Co-Authored-By: VolcaEM <volcaem@users.noreply.github.com>
* main: load per-game settings after LoadROM
This prevents `Restart Emulation` from restoring the global settings *after* the per-game settings were applied. Thanks to BSoDGamingYT for finding this bug.
* Revert "main: load per-game settings after LoadROM"
This reverts commit 9d0d48c52d2dcf3bfb1806cc8fa7d5a271a8a804.
* main: only restore global settings when necessary
Loading the per-game settings cannot happen after the ROM is loaded, so we have to specify when to restore the global state. Again thanks to BSoD for finding the bug.
* configuration_shared: address reviewer concerns except operator overrides
Dropping operator override usage in next commit.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
* settings: Drop operator overrides from Setting template
Requires using GetValue and SetValue explicitly. Also reverts a change that broke title ID formatting in the game properties dialog.
* complete rebase
* configuration_shared: translate "Use global configuration"
Uses ConfigurePerGame to do so, since its usage, at least as of now, corresponds with ConfigurationShared.
* configure_per_game: address reviewer concern
As far as I understand, it prevents the program from unnecessarily copying strings.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
Co-authored-by: VolcaEM <volcaem@users.noreply.github.com>
Co-authored-by: LC <lioncash@users.noreply.github.com>
|
|
anisotropic filtering levels.
|
|
|
|
- We have some important audio settings, makes them more discoverable.
|
|
|
|
Also displays current events if boxcat is selected.
|
|
|
|
user-facing/translatable text
Co-Authored-By: Weiyi Wang <wwylele@gmail.com>
|
