Add corrected formatting for bullet lists

Markdown bullet lists should: (1) have a blank line before and after
the list; (2) start each list item at the beginning of the line (no leading white-space)

The markdown processor in Freedom Studio enforces these standards and does
not render correctly otherwise.

1 files changed, 10 insertions, 9 deletions

diff --git a/bsp/sifive-hifive1/README.md b/bsp/sifive-hifive1/README.md
index 1cc077e..faca2eb 100644
--- a/bsp/sifive-hifive1/README.md
+++ b/bsp/sifive-hifive1/README.md
@@ -1,12 +1,13 @@
 HiFive1 is a low-cost, Arduino-compatible development board featuring the Freedom E310. It’s the best way to start prototyping and developing your RISC‑V applications.
 
 his FPGA core target is ideal maker and hobbist to develop running application software building on top of freedom-metal libraries. The target supports:
-        - 1 hart with RV32IMAC core
-        - 4 hardware breakpoints
-        - Physical Mempory Protectin with 8 regions
-        - 16 local interrupts signal that can be connected to off core complex devices
-        - Up to 127 PLIC interrupt signals that can be connected to off core complex devices, with 7 priority levels
-        - GPIO memory with 16 interrupt lines
-        - SPI memory with 1 intterupt line
-        - Serial port with 1 interrupt line
-        - 1 RGB LEDS
+
+- 1 hart with RV32IMAC core
+- 4 hardware breakpoints
+- Physical Mempory Protectin with 8 regions
+- 16 local interrupts signal that can be connected to off core complex devices
+- Up to 127 PLIC interrupt signals that can be connected to off core complex devices, with 7 priority levels
+- GPIO memory with 16 interrupt lines
+- SPI memory with 1 intterupt line
+- Serial port with 1 interrupt line
+- 1 RGB LEDS