Update SDK For E31/E51 Coreplex IP Evaluation

26 files changed, 636 insertions, 78 deletions

diff --git a/bsp/drivers/fe300prci/fe300prci_driver.c b/bsp/drivers/fe300prci/fe300prci_driver.c
index 2d9c52f..8eeaafc 100644
--- a/bsp/drivers/fe300prci/fe300prci_driver.c
+++ b/bsp/drivers/fe300prci/fe300prci_driver.c
@@ -2,7 +2,7 @@
 
 #include "platform.h"
 
-#ifdef PRCI_BASE_ADDR
+#ifdef PRCI_CTRL_ADDR
 #include "fe300prci/fe300prci_driver.h"
 #include <unistd.h>
 
diff --git a/bsp/env/common.mk b/bsp/env/common.mk
index 74f5582..32703a6 100644
--- a/bsp/env/common.mk
+++ b/bsp/env/common.mk
@@ -8,7 +8,6 @@ all: $(TARGET)
 
 include $(BSP_BASE)/libwrap/libwrap.mk
 
-BOARD ?= freedom-e300-hifive1
 ENV_DIR = $(BSP_BASE)/env
 PLATFORM_DIR = $(ENV_DIR)/$(BOARD)
 
@@ -25,9 +24,6 @@ INCLUDES += -I$(PLATFORM_DIR)
 
 TOOL_DIR = $(BSP_BASE)/../toolchain/bin
 
-CC := $(TOOL_DIR)/riscv32-unknown-elf-gcc
-AR := $(TOOL_DIR)/riscv32-unknown-elf-ar
-
 LDFLAGS += -T $(LINKER_SCRIPT) -nostartfiles
 LDFLAGS += -L$(ENV_DIR)
 
@@ -40,6 +36,9 @@ LINK_DEPS += $(LINKER_SCRIPT)
 CLEAN_OBJS += $(TARGET) $(LINK_OBJS)
 
 CFLAGS += -g
+CFLAGS += -march=$(RISCV_ARCH)
+CFLAGS += -mabi=$(RISCV_ABI)
+CFLAGS += -mcmodel=medany
 
 $(TARGET): $(LINK_OBJS) $(LINK_DEPS)
 	$(CC) $(CFLAGS) $(INCLUDES) $(LINK_OBJS) -o $@ $(LDFLAGS)
diff --git a/bsp/env/coreplexip-arty.h b/bsp/env/coreplexip-arty.h
new file mode 100644
index 0000000..12ff9a6
--- /dev/null
+++ b/bsp/env/coreplexip-arty.h
@@ -0,0 +1,102 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_COREPLEXIP_ARTY_H
+#define _SIFIVE_COREPLEXIP_ARTY_H
+
+#include <stdint.h>
+
+/****************************************************************************
+ * GPIO Connections
+ *****************************************************************************/
+
+// These are the GPIO bit offsets for the directly driven
+// RGB LEDs on the Freedom Exx Coreplex IP Evaluation Arty FPGA Dev Kit.
+// Additional RGB LEDs are driven by the 3 PWM outputs.
+
+#define RED_LED_OFFSET   0
+#define GREEN_LED_OFFSET 1
+#define BLUE_LED_OFFSET  2
+
+// Switch 3 is used as a GPIO input. (Switch 0 is used to set
+// the reset vector, the other switches are unused).
+
+#define SW_3_OFFSET      3
+
+// These are the buttons which are mapped as inputs.
+
+#define HAS_BOARD_BUTTONS
+
+#define BUTTON_0_OFFSET  4
+#define BUTTON_1_OFFSET  5
+#define BUTTON_2_OFFSET  6
+#define BUTTON_3_OFFSET  7
+
+// These are the bit offsets for the different GPIO pins
+// mapped onto the PMOD A header.
+
+#define JA_0_OFFSET 8
+#define JA_1_OFFSET 9
+#define JA_2_OFFSET 10
+#define JA_3_OFFSET 11
+#define JA_4_OFFSET 12
+#define JA_5_OFFSET 13
+#define JA_6_OFFSET 14
+#define JA_7_OFFSET 15
+
+// The below gives a mapping between global interrupt
+// sources and their number. Note that on the coreplex
+// deliverable, the io_global_interrupts go directly into
+// the PLIC. The evaluation image on the FPGA mimics a
+// system with peripheral devices which are driving the
+// global interrupt lines.
+// So, on this image, in order to get an interrupt from
+// e.g. pressing BUTTON_0:
+// 1) Steps which are external to the delivery coreplex:
+//   a) The corresponding GPIO pin must be configured as in input
+//   b) The "interrupt on fall" bit must be set for the GPIO pin
+// 2) Steps which would also need to be performed for the delivery coreplex:
+//   a) The corresponding global interrupt, priority, and threshold must be configured in the PLIC.
+//   b) The external interrupt bit must be enabled in MSTATUS
+//   c) Interrupts must be enabled globally in the core.
+
+// Any of the above GPIO pins can be used as global interrupt
+// sources by adding their offset to the INT_GPIO_BASE.
+// For example, the buttons are shown here:
+
+#define INT_DEVICE_BUTTON_0 (GPIO_INT_BASE + BUTTON_0_OFFSET)
+#define INT_DEVICE_BUTTON_1 (GPIO_INT_BASE + BUTTON_1_OFFSET)
+#define INT_DEVICE_BUTTON_2 (GPIO_INT_BASE + BUTTON_2_OFFSET)
+#define INT_DEVICE_BUTTON_3 (GPIO_INT_BASE + BUTTON_3_OFFSET)
+
+// In addition, the Switches are mapped directly to
+// the PLIC (without going through the GPIO Peripheral).
+
+#define INT_EXT_DEVICE_SW_0 (EXTERNAL_INT_BASE + 0)
+#define INT_EXT_DEVICE_SW_1 (EXTERNAL_INT_BASE + 1)
+#define INT_EXT_DEVICE_SW_2 (EXTERNAL_INT_BASE + 2)
+#define INT_EXT_DEVICE_SW_3 (EXTERNAL_INT_BASE + 3)
+
+// This gives the mapping from inputs to LOCAL interrupts.
+
+#define LOCAL_INT_SW_0   0 
+#define LOCAL_INT_SW_1   1
+#define LOCAL_INT_SW_2   2 
+#define LOCAL_INT_SW_3   3
+#define LOCAL_INT_BTN_0  4
+#define LOCAL_INT_BTN_1  5
+#define LOCAL_INT_BTN_2  6
+#define LOCAL_INT_BTN_3  7
+#define LOCAL_INT_JA_0   8
+#define LOCAL_INT_JA_1   9
+#define LOCAL_INT_JA_2   10
+#define LOCAL_INT_JA_3   11
+#define LOCAL_INT_JA_4   12
+#define LOCAL_INT_JA_5   13
+#define LOCAL_INT_JA_6   14
+#define LOCAL_INT_JA_7   15
+
+#define RTC_FREQ 32768
+
+void write_hex(int fd, uint32_t hex);
+
+#endif /* _SIFIVE_COREPLEXIP_ARTY_H */
diff --git a/bsp/env/coreplexip-e31-arty/init.c b/bsp/env/coreplexip-e31-arty/init.c
new file mode 100644
index 0000000..05b2b3e
--- /dev/null
+++ b/bsp/env/coreplexip-e31-arty/init.c
@@ -0,0 +1,94 @@
+//See LICENSE for license details.
+#include <stdint.h>
+#include <stdio.h>
+#include <unistd.h>
+
+#include "platform.h"
+#include "encoding.h"
+
+extern int main(int argc, char** argv);
+extern void trap_entry();
+
+static unsigned long get_cpu_freq()
+{
+  return 65000000;
+}
+
+unsigned long get_timer_freq()
+{
+  return get_cpu_freq();
+}
+
+uint64_t get_timer_value()
+{
+#if __riscv_xlen == 32
+  while (1) {
+    uint32_t hi = read_csr(mcycleh);
+    uint32_t lo = read_csr(mcycle);
+    if (hi == read_csr(mcycleh))
+      return ((uint64_t)hi << 32) | lo;
+  }
+#else
+  return read_csr(mcycle);
+#endif
+}
+
+static void uart_init(size_t baud_rate)
+{
+  UART0_REG(UART_REG_DIV) = (get_cpu_freq() / 2) / baud_rate - 1;
+  UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
+}
+
+
+#ifdef USE_PLIC
+extern void handle_m_ext_interrupt();
+#endif
+
+#ifdef USE_M_TIME
+extern void handle_m_time_interrupt();
+#endif
+
+#ifdef USE_LOCAL_ISR
+typedef void (*my_interrupt_function_ptr_t) (void);
+extern my_interrupt_function_ptr_t localISR[];
+#endif
+
+uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc)
+{
+  if (0){
+#ifdef USE_PLIC
+    // External Machine-Level interrupt from PLIC
+  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_EXT)) {
+    handle_m_ext_interrupt();
+#endif
+#ifdef USE_M_TIME
+    // External Machine-Level interrupt from PLIC
+  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_TIMER)){
+    handle_m_time_interrupt();
+#endif
+#ifdef USE_LOCAL_ISR
+  } else if (mcause & MCAUSE_INT) {
+    localISR[mcause & MCAUSE_CAUSE] ();
+#endif
+  }
+  else {
+    write(1, "Unhandled Trap:\n", 16);
+    _exit(1 + mcause);
+  }
+  return epc;
+}
+
+void _init()
+{
+  #ifndef NO_INIT
+  uart_init(115200);
+
+  printf("core freq at %d Hz\n", get_cpu_freq());
+
+  write_csr(mtvec, &trap_entry);
+  #endif
+}
+
+void _fini()
+{
+}
diff --git a/bsp/env/coreplexip-e31-arty/link.lds b/bsp/env/coreplexip-e31-arty/link.lds
new file mode 100644
index 0000000..45a82d7
--- /dev/null
+++ b/bsp/env/coreplexip-e31-arty/link.lds
@@ -0,0 +1,167 @@
+OUTPUT_ARCH( "riscv" )
+
+ENTRY( _start )
+
+MEMORY
+{
+  flash (rxai!w) : ORIGIN = 0x40400000, LENGTH = 512M
+  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
+}
+
+PHDRS
+{
+  flash PT_LOAD;
+  ram_init PT_LOAD;
+  ram PT_NULL;
+}
+
+SECTIONS
+{
+  __stack_size = DEFINED(__stack_size) ? __stack_size : 2K;
+
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  } >flash AT>flash :flash
+
+  .text           :
+  {
+    *(.text.unlikely .text.unlikely.*)
+    *(.text.startup .text.startup.*)
+    *(.text .text.*)
+    *(.gnu.linkonce.t.*)
+  } >flash AT>flash :flash
+
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  } >flash AT>flash :flash
+
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+
+  .rodata         :
+  {
+    *(.rdata)
+    *(.rodata .rodata.*)
+    *(.gnu.linkonce.r.*)
+  } >flash AT>flash :flash
+
+  . = ALIGN(4);
+
+  .preinit_array  :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >flash AT>flash :flash
+
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >flash AT>flash :flash
+
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >flash AT>flash :flash
+
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  } >flash AT>flash :flash
+
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  } >flash AT>flash :flash
+
+  .lalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data_lma = . );
+  } >flash AT>flash :flash
+
+  .dalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data = . );
+  } >ram AT>flash :ram_init
+
+  .data          :
+  {
+    *(.data .data.*)
+    *(.gnu.linkonce.d.*)
+  } >ram AT>flash :ram_init
+
+  .srodata        :
+  {
+    PROVIDE( _gp = . + 0x800 );
+    *(.srodata.cst16)
+    *(.srodata.cst8)
+    *(.srodata.cst4)
+    *(.srodata.cst2)
+    *(.srodata .srodata.*)
+  } >ram AT>flash :ram_init
+
+  .sdata          :
+  {
+    *(.sdata .sdata.*)
+    *(.gnu.linkonce.s.*)
+  } >ram AT>flash :ram_init
+
+  . = ALIGN(4);
+  PROVIDE( _edata = . );
+  PROVIDE( edata = . );
+
+  PROVIDE( _fbss = . );
+  PROVIDE( __bss_start = . );
+  .bss            :
+  {
+    *(.sbss*)
+    *(.gnu.linkonce.sb.*)
+    *(.bss .bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN(4);
+  } >ram AT>ram :ram
+
+  . = ALIGN(8);
+  PROVIDE( _end = . );
+  PROVIDE( end = . );
+
+  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
+  {
+    PROVIDE( _heap_end = . );
+    . = __stack_size;
+    PROVIDE( _sp = . );
+  } >ram AT>ram :ram
+}
diff --git a/bsp/env/coreplexip-e31-arty/openocd.cfg b/bsp/env/coreplexip-e31-arty/openocd.cfg
new file mode 100644
index 0000000..0481a72
--- /dev/null
+++ b/bsp/env/coreplexip-e31-arty/openocd.cfg
@@ -0,0 +1,31 @@
+# JTAG adapter setup
+adapter_khz     10000
+
+interface ftdi
+ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
+ftdi_vid_pid 0x15ba 0x002a
+
+ftdi_layout_init 0x0808 0x0a1b
+ftdi_layout_signal nSRST -oe 0x0200
+#ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
+ftdi_layout_signal LED -data 0x0800
+
+set _CHIPNAME riscv
+jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000001
+
+set _TARGETNAME $_CHIPNAME.cpu
+
+target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
+$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
+
+# Un-comment these two flash lines if you have a SPI flash and want to write
+# it.
+flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000
+init
+if {[ info exists pulse_srst]} {
+  ftdi_set_signal nSRST 0
+  ftdi_set_signal nSRST z
+}
+halt
+#flash protect 0 64 last off
+echo "Ready for Remote Connections"
diff --git a/bsp/env/coreplexip-e31-arty/platform.h b/bsp/env/coreplexip-e31-arty/platform.h
new file mode 100644
index 0000000..02a0a62
--- /dev/null
+++ b/bsp/env/coreplexip-e31-arty/platform.h
@@ -0,0 +1,84 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_PLATFORM_H
+#define _SIFIVE_PLATFORM_H
+
+// Some things missing from the official encoding.h
+#define MCAUSE_INT         0x80000000
+#define MCAUSE_CAUSE       0x7FFFFFFF
+
+#define IRQ_M_LOCAL        16
+#define MIP_MLIP(x)        (1 << (IRQ_M_LOCAL + x))
+
+#include "sifive/const.h"
+#include "sifive/devices/clint.h"
+#include "sifive/devices/gpio.h"
+#include "sifive/devices/plic.h"
+#include "sifive/devices/pwm.h"
+#include "sifive/devices/spi.h"
+#include "sifive/devices/uart.h"
+
+/****************************************************************************
+ * Platform definitions
+ *****************************************************************************/
+
+// Memory map
+#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
+#define GPIO_CTRL_ADDR _AC(0x20002000,UL)
+#define PLIC_CTRL_ADDR _AC(0x0C000000,UL)
+#define PWM0_CTRL_ADDR _AC(0x20005000,UL)
+#define RAM_MEM_ADDR _AC(0x80000000,UL)
+#define RAM_MEM_SIZE _AC(0x10000,UL)
+#define SPI0_CTRL_ADDR _AC(0x20004000,UL)
+#define SPI0_MEM_ADDR _AC(0x40000000,UL)
+#define SPI0_MEM_SIZE _AC(0x20000000,UL)
+#define TESTBENCH_MEM_ADDR _AC(0x20000000,UL)
+#define TESTBENCH_MEM_SIZE _AC(0x10000000,UL)
+#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
+#define UART0_CTRL_ADDR _AC(0x20000000,UL)
+
+// IOF masks
+
+// Interrupt numbers
+#define RESERVED_INT_BASE 0
+#define UART0_INT_BASE 1
+#define EXTERNAL_INT_BASE 2
+#define SPI0_INT_BASE 6
+#define GPIO_INT_BASE 7
+#define PWM0_INT_BASE 23
+
+// Helper functions
+#define _REG64(p, i) (*(volatile uint64_t *)((p) + (i)))
+#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i)))
+#define _REG16(p, i) (*(volatile uint16_t *)((p) + (i)))
+// Bulk set bits in `reg` to either 0 or 1.
+// E.g. SET_BITS(MY_REG, 0x00000007, 0) would generate MY_REG &= ~0x7
+// E.g. SET_BITS(MY_REG, 0x00000007, 1) would generate MY_REG |= 0x7
+#define SET_BITS(reg, mask, value) if ((value) == 0) { (reg) &= ~(mask); } else { (reg) |= (mask); }
+#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
+#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
+#define PLIC_REG(offset) _REG32(PLIC_CTRL_ADDR, offset)
+#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
+#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
+#define TRAPVEC_TABLE_REG(offset) _REG32(TRAPVEC_TABLE_CTRL_ADDR, offset)
+#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
+#define CLINT_REG64(offset) _REG64(CLINT_CTRL_ADDR, offset)
+#define GPIO_REG64(offset) _REG64(GPIO_CTRL_ADDR, offset)
+#define PLIC_REG64(offset) _REG64(PLIC_CTRL_ADDR, offset)
+#define PWM0_REG64(offset) _REG64(PWM0_CTRL_ADDR, offset)
+#define SPI0_REG64(offset) _REG64(SPI0_CTRL_ADDR, offset)
+#define TRAPVEC_TABLE_REG64(offset) _REG64(TRAPVEC_TABLE_CTRL_ADDR, offset)
+#define UART0_REG64(offset) _REG64(UART0_CTRL_ADDR, offset)
+
+// Misc
+
+#define NUM_GPIO 16
+
+#define PLIC_NUM_INTERRUPTS 28
+#define PLIC_NUM_PRIORITIES 7
+
+#define HAS_BOARD_BUTTONS
+
+#include "coreplexip-arty.h"
+
+#endif /* _SIFIVE_PLATFORM_H */
diff --git a/bsp/env/coreplexip-e31-arty/settings.mk b/bsp/env/coreplexip-e31-arty/settings.mk
new file mode 100644
index 0000000..230fccc
--- /dev/null
+++ b/bsp/env/coreplexip-e31-arty/settings.mk
@@ -0,0 +1,3 @@
+# Describes the CPU on this board to the rest of the SDK.
+RISCV_ARCH := rv32imac
+RISCV_ABI  := ilp32
diff --git a/bsp/env/coreplexip-e51-arty/init.c b/bsp/env/coreplexip-e51-arty/init.c
new file mode 120000
index 0000000..de048a9
--- /dev/null
+++ b/bsp/env/coreplexip-e51-arty/init.c
@@ -0,0 +1 @@
+../coreplexip-e31-arty/init.c
\ No newline at end of file
diff --git a/bsp/env/coreplexip-e51-arty/link.lds b/bsp/env/coreplexip-e51-arty/link.lds
new file mode 120000
index 0000000..f3e0254
--- /dev/null
+++ b/bsp/env/coreplexip-e51-arty/link.lds
@@ -0,0 +1 @@
+../coreplexip-e31-arty/link.lds
\ No newline at end of file
diff --git a/bsp/env/coreplexip-e51-arty/openocd.cfg b/bsp/env/coreplexip-e51-arty/openocd.cfg
new file mode 120000
index 0000000..2f4de8d
--- /dev/null
+++ b/bsp/env/coreplexip-e51-arty/openocd.cfg
@@ -0,0 +1 @@
+../coreplexip-e31-arty/openocd.cfg
\ No newline at end of file
diff --git a/bsp/env/coreplexip-e51-arty/platform.h b/bsp/env/coreplexip-e51-arty/platform.h
new file mode 120000
index 0000000..311ca36
--- /dev/null
+++ b/bsp/env/coreplexip-e51-arty/platform.h
@@ -0,0 +1 @@
+../coreplexip-e31-arty/platform.h
\ No newline at end of file
diff --git a/bsp/env/coreplexip-e51-arty/settings.mk b/bsp/env/coreplexip-e51-arty/settings.mk
new file mode 100644
index 0000000..96aea84
--- /dev/null
+++ b/bsp/env/coreplexip-e51-arty/settings.mk
@@ -0,0 +1,3 @@
+# Describes the CPU on this board to the rest of the SDK.
+RISCV_ARCH := rv64imac
+RISCV_ABI  := lp64
diff --git a/bsp/env/freedom-e300-arty/platform.h b/bsp/env/freedom-e300-arty/platform.h
index d5d6dda..a3a3c07 100644
--- a/bsp/env/freedom-e300-arty/platform.h
+++ b/bsp/env/freedom-e300-arty/platform.h
@@ -20,21 +20,21 @@
  * Platform definitions
  *****************************************************************************/
 
-#define TRAPVEC_TABLE_BASE_ADDR _AC(0x00001010,UL)
-#define CLINT_BASE_ADDR _AC(0x02000000,UL)
-#define PLIC_BASE_ADDR _AC(0x0C000000,UL)
-#define AON_BASE_ADDR _AC(0x10000000,UL)
-#define GPIO_BASE_ADDR _AC(0x10012000,UL)
-#define UART0_BASE_ADDR _AC(0x10013000,UL)
-#define SPI0_BASE_ADDR _AC(0x10014000,UL)
-#define PWM0_BASE_ADDR _AC(0x10015000,UL)
-#define UART1_BASE_ADDR _AC(0x10023000,UL)
-#define SPI1_BASE_ADDR _AC(0x10024000,UL)
-#define PWM1_BASE_ADDR _AC(0x10025000,UL)
-#define SPI2_BASE_ADDR _AC(0x10034000,UL)
-#define PWM2_BASE_ADDR _AC(0x10035000,UL)
+#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
+#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
+#define PLIC_CTRL_ADDR _AC(0x0C000000,UL)
+#define AON_CTRL_ADDR _AC(0x10000000,UL)
+#define GPIO_CTRL_ADDR _AC(0x10012000,UL)
+#define UART0_CTRL_ADDR _AC(0x10013000,UL)
+#define SPI0_CTRL_ADDR _AC(0x10014000,UL)
+#define PWM0_CTRL_ADDR _AC(0x10015000,UL)
+#define UART1_CTRL_ADDR _AC(0x10023000,UL)
+#define SPI1_CTRL_ADDR _AC(0x10024000,UL)
+#define PWM1_CTRL_ADDR _AC(0x10025000,UL)
+#define SPI2_CTRL_ADDR _AC(0x10034000,UL)
+#define PWM2_CTRL_ADDR _AC(0x10035000,UL)
 #define SPI0_MMAP_ADDR _AC(0x20000000,UL)
-#define MEM_BASE_ADDR _AC(0x80000000,UL)
+#define MEM_CTRL_ADDR _AC(0x80000000,UL)
 
 // IOF Mappings
 #define IOF0_SPI1_MASK          _AC(0x000007FC,UL)
@@ -91,20 +91,20 @@
 // Helper functions
 #define _REG32(p, i) (*(volatile uint32_t *) ((p) + (i)))
 #define _REG32P(p, i) ((volatile uint32_t *) ((p) + (i)))
-#define AON_REG(offset) _REG32(AON_BASE_ADDR, offset)
-#define CLINT_REG(offset) _REG32(CLINT_BASE_ADDR, offset)
-#define GPIO_REG(offset) _REG32(GPIO_BASE_ADDR, offset)
-#define OTP_REG(offset)  _REG32(OTP_BASE_ADDR, offset)
-#define PLIC_REG(offset) _REG32(PLIC_BASE_ADDR, offset)
-#define PRCI_REG(offset) _REG32(PRCI_BASE_ADDR, offset)
-#define PWM0_REG(offset) _REG32(PWM0_BASE_ADDR, offset)
-#define PWM1_REG(offset) _REG32(PWM1_BASE_ADDR, offset)
-#define PWM2_REG(offset) _REG32(PWM2_BASE_ADDR, offset)
-#define SPI0_REG(offset) _REG32(SPI0_BASE_ADDR, offset)
-#define SPI1_REG(offset) _REG32(SPI1_BASE_ADDR, offset)
-#define SPI2_REG(offset) _REG32(SPI2_BASE_ADDR, offset)
-#define UART0_REG(offset) _REG32(UART0_BASE_ADDR, offset)
-#define UART1_REG(offset) _REG32(UART1_BASE_ADDR, offset)
+#define AON_REG(offset) _REG32(AON_CTRL_ADDR, offset)
+#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
+#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
+#define OTP_REG(offset)  _REG32(OTP_CTRL_ADDR, offset)
+#define PLIC_REG(offset) _REG32(PLIC_CTRL_ADDR, offset)
+#define PRCI_REG(offset) _REG32(PRCI_CTRL_ADDR, offset)
+#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
+#define PWM1_REG(offset) _REG32(PWM1_CTRL_ADDR, offset)
+#define PWM2_REG(offset) _REG32(PWM2_CTRL_ADDR, offset)
+#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
+#define SPI1_REG(offset) _REG32(SPI1_CTRL_ADDR, offset)
+#define SPI2_REG(offset) _REG32(SPI2_CTRL_ADDR, offset)
+#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
+#define UART1_REG(offset) _REG32(UART1_CTRL_ADDR, offset)
 
 // Misc
 
diff --git a/bsp/env/freedom-e300-arty/settings.mk b/bsp/env/freedom-e300-arty/settings.mk
new file mode 100644
index 0000000..230fccc
--- /dev/null
+++ b/bsp/env/freedom-e300-arty/settings.mk
@@ -0,0 +1,3 @@
+# Describes the CPU on this board to the rest of the SDK.
+RISCV_ARCH := rv32imac
+RISCV_ABI  := ilp32
diff --git a/bsp/env/freedom-e300-hifive1/init.c b/bsp/env/freedom-e300-hifive1/init.c
index de046cc..621a6e2 100644
--- a/bsp/env/freedom-e300-hifive1/init.c
+++ b/bsp/env/freedom-e300-hifive1/init.c
@@ -10,14 +10,14 @@ extern void trap_entry();
 
 static unsigned long mtime_lo(void)
 {
-  return *(volatile unsigned long *)(CLINT_BASE_ADDR + CLINT_MTIME);
+  return *(volatile unsigned long *)(CLINT_CTRL_ADDR + CLINT_MTIME);
 }
 
 #ifdef __riscv32
 
 static uint32_t mtime_hi(void)
 {
-  return *(volatile uint32_t *)(CLINT_BASE_ADDR + CLINT_MTIME + 4);
+  return *(volatile uint32_t *)(CLINT_CTRL_ADDR + CLINT_MTIME + 4);
 }
 
 uint64_t get_timer_value()
diff --git a/bsp/env/freedom-e300-hifive1/platform.h b/bsp/env/freedom-e300-hifive1/platform.h
index 63efc9e..806fcfc 100644
--- a/bsp/env/freedom-e300-hifive1/platform.h
+++ b/bsp/env/freedom-e300-hifive1/platform.h
@@ -23,25 +23,25 @@
  *****************************************************************************/
 
 // Memory map
-#define MASKROM_BASE_ADDR _AC(0x00001000,UL)
-#define TRAPVEC_TABLE_BASE_ADDR _AC(0x00001010,UL)
-#define OTP_MMAP_ADDR _AC(0x00020000,UL)
-#define CLINT_BASE_ADDR _AC(0x02000000,UL)
-#define PLIC_BASE_ADDR _AC(0x0C000000,UL)
-#define AON_BASE_ADDR _AC(0x10000000,UL)
-#define PRCI_BASE_ADDR _AC(0x10008000,UL)
-#define OTP_BASE_ADDR _AC(0x10010000,UL)
-#define GPIO_BASE_ADDR _AC(0x10012000,UL)
-#define UART0_BASE_ADDR _AC(0x10013000,UL)
-#define SPI0_BASE_ADDR _AC(0x10014000,UL)
-#define PWM0_BASE_ADDR _AC(0x10015000,UL)
-#define UART1_BASE_ADDR _AC(0x10023000,UL)
-#define SPI1_BASE_ADDR _AC(0x10024000,UL)
-#define PWM1_BASE_ADDR _AC(0x10025000,UL)
-#define SPI2_BASE_ADDR _AC(0x10034000,UL)
-#define PWM2_BASE_ADDR _AC(0x10035000,UL)
-#define SPI0_MMAP_ADDR _AC(0x20000000,UL)
-#define MEM_BASE_ADDR _AC(0x80000000,UL)
+#define MASKROM_MEM_ADDR _AC(0x00001000,UL)
+#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
+#define OTP_MEM_ADDR _AC(0x00020000,UL)
+#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
+#define PLIC_CTRL_ADDR _AC(0x0C000000,UL)
+#define AON_CTRL_ADDR _AC(0x10000000,UL)
+#define PRCI_CTRL_ADDR _AC(0x10008000,UL)
+#define OTP_CTRL_ADDR _AC(0x10010000,UL)
+#define GPIO_CTRL_ADDR _AC(0x10012000,UL)
+#define UART0_CTRL_ADDR _AC(0x10013000,UL)
+#define SPI0_CTRL_ADDR _AC(0x10014000,UL)
+#define PWM0_CTRL_ADDR _AC(0x10015000,UL)
+#define UART1_CTRL_ADDR _AC(0x10023000,UL)
+#define SPI1_CTRL_ADDR _AC(0x10024000,UL)
+#define PWM1_CTRL_ADDR _AC(0x10025000,UL)
+#define SPI2_CTRL_ADDR _AC(0x10034000,UL)
+#define PWM2_CTRL_ADDR _AC(0x10035000,UL)
+#define SPI0_MEM_ADDR _AC(0x20000000,UL)
+#define MEM_CTRL_ADDR _AC(0x80000000,UL)
 
 // IOF masks
 #define IOF0_SPI1_MASK          _AC(0x000007FC,UL)
@@ -100,20 +100,20 @@
 // Helper functions
 #define _REG32(p, i) (*(volatile uint32_t *) ((p) + (i)))
 #define _REG32P(p, i) ((volatile uint32_t *) ((p) + (i)))
-#define AON_REG(offset) _REG32(AON_BASE_ADDR, offset)
-#define CLINT_REG(offset) _REG32(CLINT_BASE_ADDR, offset)
-#define GPIO_REG(offset) _REG32(GPIO_BASE_ADDR, offset)
-#define OTP_REG(offset)  _REG32(OTP_BASE_ADDR, offset)
-#define PLIC_REG(offset) _REG32(PLIC_BASE_ADDR, offset)
-#define PRCI_REG(offset) _REG32(PRCI_BASE_ADDR, offset)
-#define PWM0_REG(offset) _REG32(PWM0_BASE_ADDR, offset)
-#define PWM1_REG(offset) _REG32(PWM1_BASE_ADDR, offset)
-#define PWM2_REG(offset) _REG32(PWM2_BASE_ADDR, offset)
-#define SPI0_REG(offset) _REG32(SPI0_BASE_ADDR, offset)
-#define SPI1_REG(offset) _REG32(SPI1_BASE_ADDR, offset)
-#define SPI2_REG(offset) _REG32(SPI2_BASE_ADDR, offset)
-#define UART0_REG(offset) _REG32(UART0_BASE_ADDR, offset)
-#define UART1_REG(offset) _REG32(UART1_BASE_ADDR, offset)
+#define AON_REG(offset) _REG32(AON_CTRL_ADDR, offset)
+#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
+#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
+#define OTP_REG(offset)  _REG32(OTP_CTRL_ADDR, offset)
+#define PLIC_REG(offset) _REG32(PLIC_CTRL_ADDR, offset)
+#define PRCI_REG(offset) _REG32(PRCI_CTRL_ADDR, offset)
+#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
+#define PWM1_REG(offset) _REG32(PWM1_CTRL_ADDR, offset)
+#define PWM2_REG(offset) _REG32(PWM2_CTRL_ADDR, offset)
+#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
+#define SPI1_REG(offset) _REG32(SPI1_CTRL_ADDR, offset)
+#define SPI2_REG(offset) _REG32(SPI2_CTRL_ADDR, offset)
+#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
+#define UART1_REG(offset) _REG32(UART1_CTRL_ADDR, offset)
 
 // Misc
 
diff --git a/bsp/env/freedom-e300-hifive1/settings.mk b/bsp/env/freedom-e300-hifive1/settings.mk
new file mode 100644
index 0000000..230fccc
--- /dev/null
+++ b/bsp/env/freedom-e300-hifive1/settings.mk
@@ -0,0 +1,3 @@
+# Describes the CPU on this board to the rest of the SDK.
+RISCV_ARCH := rv32imac
+RISCV_ABI  := ilp32
diff --git a/bsp/env/start.S b/bsp/env/start.S
index b526411..9ec6c1c 100644
--- a/bsp/env/start.S
+++ b/bsp/env/start.S
@@ -1,5 +1,7 @@
 // See LICENSE for license details.
 
+// See LICENSE for license details.
+
 	.section .init
 	.globl _start
 	.type _start,@function
@@ -50,5 +52,7 @@ _start:
 	/* argc = argv = 0 */
 	li a0, 0
 	li a1, 0
+	call _init
 	call main
+	call _fini
 	tail exit
diff --git a/bsp/include/sifive/bits.h b/bsp/include/sifive/bits.h
index e550f80..bfe656f 100644
--- a/bsp/include/sifive/bits.h
+++ b/bsp/include/sifive/bits.h
@@ -1,3 +1,4 @@
+// See LICENSE for license details.
 #ifndef _RISCV_BITS_H
 #define _RISCV_BITS_H
 
@@ -17,7 +18,7 @@
 #define STR(x) XSTR(x)
 #define XSTR(x) #x
 
-#ifdef __riscv64
+#if __riscv_xlen == 64
 # define SLL32    sllw
 # define STORE    sd
 # define LOAD     ld
diff --git a/bsp/include/sifive/const.h b/bsp/include/sifive/const.h
index 3e0a681..8dcffbb 100644
--- a/bsp/include/sifive/const.h
+++ b/bsp/include/sifive/const.h
@@ -1,3 +1,4 @@
+// See LICENSE for license details.
 /* Derived from <linux/const.h> */
 
 #ifndef _SIFIVE_CONST_H
diff --git a/bsp/include/sifive/sections.h b/bsp/include/sifive/sections.h
index 848c237..6e1f051 100644
--- a/bsp/include/sifive/sections.h
+++ b/bsp/include/sifive/sections.h
@@ -1,3 +1,4 @@
+// See LICENSE for license details.
 #ifndef _SECTIONS_H
 #define _SECTIONS_H
 
diff --git a/bsp/include/sifive/smp.h b/bsp/include/sifive/smp.h
new file mode 100644
index 0000000..8e34388
--- /dev/null
+++ b/bsp/include/sifive/smp.h
@@ -0,0 +1,65 @@
+#ifndef SIFIVE_SMP
+#define SIFIVE_SMP
+
+// The maximum number of HARTs this code supports
+#ifndef MAX_HARTS
+#define MAX_HARTS 32
+#endif
+#define CLINT_END_HART_IPI CLINT_CTRL_ADDR + (MAX_HARTS*4)
+
+// The hart that non-SMP tests should run on
+#ifndef NONSMP_HART
+#define NONSMP_HART 0
+#endif
+
+/* If your test cannot handle multiple-threads, use this: 
+ *   smp_disable(reg1)
+ */
+#define smp_disable(reg1, reg2)			 \
+  csrr reg1, mhartid				;\
+  li   reg2, NONSMP_HART			;\
+  beq  reg1, reg2, hart0_entry			;\
+42:						;\
+  wfi    					;\
+  j 42b						;\
+hart0_entry:
+
+/* If your test needs to temporarily block multiple-threads, do this:
+ *    smp_pause(reg1, reg2)
+ *    ... single-threaded work ...
+ *    smp_resume(reg1, reg2)
+ *    ... multi-threaded work ...
+ */
+
+#define smp_pause(reg1, reg2)	 \
+  li reg2, 0x8			;\
+  csrw mie, reg2		;\
+  csrr reg2, mhartid		;\
+  bnez reg2, 42f
+
+#define smp_resume(reg1, reg2)	 \
+  li reg1, CLINT_CTRL_ADDR	;\
+41:				;\
+  li reg2, 1			;\
+  sw reg2, 0(reg1)		;\
+  addi reg1, reg1, 4		;\
+  li reg2, CLINT_END_HART_IPI	;\
+  blt reg1, reg2, 41b		;\
+42:				;\
+  wfi    			;\
+  csrr reg2, mip		;\
+  andi reg2, reg2, 0x8		;\
+  beqz reg2, 42b		;\
+  li reg1, CLINT_CTRL_ADDR	;\
+  csrr reg2, mhartid		;\
+  slli reg2, reg2, 2		;\
+  add reg2, reg2, reg1		;\
+  sw zero, 0(reg2)		;\
+41:				;\
+  lw reg2, 0(reg1)		;\
+  bnez reg2, 41b		;\
+  addi reg1, reg1, 4		;\
+  li reg2, CLINT_END_HART_IPI	;\
+  blt reg1, reg2, 41b
+
+#endif
diff --git a/bsp/libwrap/sys/_exit.c b/bsp/libwrap/sys/_exit.c
index 7261891..a548a91 100644
--- a/bsp/libwrap/sys/_exit.c
+++ b/bsp/libwrap/sys/_exit.c
@@ -5,9 +5,7 @@
 
 void __wrap__exit(int code)
 {
-//volatile uint32_t* leds = (uint32_t*) (GPIO_BASE_ADDR + GPIO_OUT_OFFSET);
   const char message[] = "\nProgam has exited with code:";
-//*leds = (~(code));
 
   write(STDERR_FILENO, message, sizeof(message) - 1);
   write_hex(STDERR_FILENO, code);
diff --git a/bsp/libwrap/sys/read.c b/bsp/libwrap/sys/read.c
index 4e57f08..4e35364 100644
--- a/bsp/libwrap/sys/read.c
+++ b/bsp/libwrap/sys/read.c
@@ -11,8 +11,8 @@
 ssize_t __wrap_read(int fd, void* ptr, size_t len)
 {
   uint8_t * current = (uint8_t *)ptr;
-  volatile uint32_t * uart_rx = (uint32_t *)(UART0_BASE_ADDR + UART_REG_RXFIFO);
-  volatile uint8_t * uart_rx_cnt = (uint8_t *)(UART0_BASE_ADDR + UART_REG_RXCTRL + 2);
+  volatile uint32_t * uart_rx = (uint32_t *)(UART0_CTRL_ADDR + UART_REG_RXFIFO);
+  volatile uint8_t * uart_rx_cnt = (uint8_t *)(UART0_CTRL_ADDR + UART_REG_RXCTRL + 2);
 
   ssize_t result = 0;
 
diff --git a/bsp/tools/openocd_upload.sh b/bsp/tools/openocd_upload.sh
deleted file mode 100755
index ecbe3b4..0000000
--- a/bsp/tools/openocd_upload.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#! /bin/bash -x
-
-openocd -f ${2} \
-	-c "flash protect 0 64 last off; program ${1} verify; resume 0x20400000; exit" \
-	2>&1 | tee openocd_upload.log