remove non-vectored example

2 files changed, 0 insertions, 239 deletions

diff --git a/software/clic_interrupts/Makefile b/software/clic_interrupts/Makefile
deleted file mode 100644
index 502534d..0000000
--- a/software/clic_interrupts/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-TARGET = clic_interrupts
-CFLAGS += -O2 -fno-builtin-printf -DUSE_CLIC -DUSE_LOCAL_ISR
-
-BSP_BASE = ../../bsp
-
-C_SRCS += clic.c
-
-include $(BSP_BASE)/env/common.mk
diff --git a/software/clic_interrupts/clic.c b/software/clic_interrupts/clic.c
deleted file mode 100644
index ccf98b2..0000000
--- a/software/clic_interrupts/clic.c
+++ /dev/null
@@ -1,231 +0,0 @@
-// See LICENSE for license details.
-
-#include <stdio.h>
-#include <stdlib.h>
-#include "platform.h"
-#include <string.h>
-#include "encoding.h"
-#include <unistd.h>
-#include "sifive/devices/clic.h"
-
-#ifndef _SIFIVE_COREPLEXIP_ARTY_H
-#error 'local_interrupts' demo only supported for Coreplex IP Eval Kits
-#endif
-
-// Global Variable used to show
-// software interrupts.
-volatile uint32_t g_debouncing;
-
-void debounce();
-
-static void clic_enable(int offset) __attribute__((noinline));
-static void clic_enable(int offset)
-{
-  CLIC_REG8(CLIC_INTCFG + offset) = 0xff;
-  CLIC_REG8(CLIC_INTIE  + offset) = 1;
-}
-
-static void clic_disable(int offset) __attribute__((noinline));
-static void clic_disable(int offset)
-{
-  CLIC_REG8(CLIC_INTCFG + offset) = 0xff;
-  CLIC_REG8(CLIC_INTIE  + offset) = 0;
-}
-
-// Structures for registering different interrupt handlers
-// for different parts of the application.
-typedef void (*interrupt_function_ptr_t) (void);
-
-// This function enables some of the local interrupts sources
-// used in this demo -- just those for the buttons and
-// Switch 3.
-
-void enable_local_interrupts(){
-  clic_enable(IRQ_M_LOCAL + LOCAL_INT_SW_3);
-  clic_enable(IRQ_M_LOCAL + LOCAL_INT_BTN_0);
-  clic_enable(IRQ_M_LOCAL + LOCAL_INT_BTN_1);
-  clic_enable(IRQ_M_LOCAL + LOCAL_INT_BTN_2);
-  clic_enable(IRQ_M_LOCAL + LOCAL_INT_BTN_3);
-}
-
-void disable_local_interrupts() {
-  clic_disable(IRQ_M_LOCAL + LOCAL_INT_SW_3);
-  clic_disable(IRQ_M_LOCAL + LOCAL_INT_BTN_0);
-  clic_disable(IRQ_M_LOCAL + LOCAL_INT_BTN_1);
-  clic_disable(IRQ_M_LOCAL + LOCAL_INT_BTN_2);
-  clic_disable(IRQ_M_LOCAL + LOCAL_INT_BTN_3);
-}
-
-/*Entry Point for Machine Software Interrupt Handler*/
-void msi_isr() {
-  const char msi_msg[] = "    Debouncing: (this message due to Software Interrupt)\n\n";
-  write (STDOUT_FILENO, msi_msg, strlen(msi_msg));  
-
-  //clear the  SW interrupt
-  CLIC_REG(CLIC_MSIP) = 0;
-}
-
-/*Entry Point for Machine Timer Interrupt Handler*/
-void mti_isr(){
-  const char mti_msg[] = "    Timer interrupt, done debouncing.\n\n";
-  write (STDOUT_FILENO, mti_msg, strlen(mti_msg));  
-
-  // Disable the timer interrupt. The Debounce logic sets it.
-  clic_disable(IRQ_M_TIMER);
-
-  // Enable all the local interrupts
-  enable_local_interrupts();
-}
-
-const char * instructions_msg = " \
-\n\
-                         SiFive, Inc\n\
- E21 Core IP Eval Kit 'clic_interrupts' demo.\n\
-\n\
-The Buttons 0-3 and Switch 3 are enabled as local\n\
-interrupts sources. A .5 s 'debounce' timer is used \n\
-between these interrupts. Software interrupts are\n\
-used to print a message while debouncing.\n\
-Note the priority of the interrupts sources.\n\
-\n";
-
-void print_instructions() {
-
-  write (STDERR_FILENO, instructions_msg, strlen(instructions_msg));
-
-}
-
-void button_0_isr(void) {
-
-  // Toggle Red LED
-  const char button_0_msg[] = "Button 0 was pressed. Toggle Red.\n";
-  write (STDOUT_FILENO, button_0_msg, strlen(button_0_msg));  
-  GPIO_REG(GPIO_OUTPUT_VAL) = GPIO_REG(GPIO_OUTPUT_VAL) ^ (0x1 << RED_LED_OFFSET);
-  debounce();  
-};
-
-void button_1_isr(void) {
-
-  // Toggle Green LED
-  const char button_1_msg[] = "Button 1 was pressed. Toggle Green.\n";
-  write (STDOUT_FILENO, button_1_msg, strlen(button_1_msg));  
-  GPIO_REG(GPIO_OUTPUT_VAL) = GPIO_REG(GPIO_OUTPUT_VAL) ^ (0x1 << GREEN_LED_OFFSET);
-  debounce();
-};
-
-
-void button_2_isr(void) {
-
-  // Toggle Blue LED
-  const char button_2_msg[] = "Button 2 was pressed. Toggle Blue.\n";
-  write (STDOUT_FILENO, button_2_msg, strlen(button_2_msg));  
-  GPIO_REG(GPIO_OUTPUT_VAL) = GPIO_REG(GPIO_OUTPUT_VAL) ^ (0x1 << BLUE_LED_OFFSET);
-  debounce();
-  
-};
-
-void button_3_isr(void) {
-  const char button_3_msg[] = "Button 3 was pressed! (No LEDs change).\n";
-  write (STDOUT_FILENO, button_3_msg, strlen(button_3_msg));
-  debounce();
-}
-
-void switch_3_isr(void) {
-  const char sw_3_msg[] = "Switch 3 is on! But buttons have higher priority.\n";
-  write (STDOUT_FILENO, sw_3_msg, strlen(sw_3_msg));
-  debounce();
-}
-
-void debounce(int local_interrupt_num) {
-  // Disable the most recent interrupt.
-  // Don't enable it again until the timer goes off,
-  // in .5 second.
-  
-  // Set the machine timer to go off in .5 seconds.
-  // If the timer was already set to go off, this "cancels"
-  // the current one.
-  
-  volatile uint64_t * mtime       = (uint64_t*) (CLINT_CTRL_ADDR + CLINT_MTIME);
-  volatile uint64_t * mtimecmp    = (uint64_t*) (CLINT_CTRL_ADDR + CLINT_MTIMECMP);
-  uint64_t now = *mtime;
-  uint64_t then = now + .5*RTC_FREQ;
-  *mtimecmp = then;
-
-  disable_local_interrupts();
-  g_debouncing = 1;
-
-  // Enable the Machine-Timer bit in MIE
-  clic_enable(IRQ_M_TIMER);
-}
-
-// See bsp/env/<BOARD>/init.c for how this
-// interrupt vector is used.
-
-interrupt_function_ptr_t localISR[32]; 
-
-static void unmapped_interrupt(void) {
-  printf("unmapped interrupt");
-  asm volatile ("1: j 1b" ::: "memory");
-}
-
-int main(int argc, char **argv)
-{
-  // Configure LEDs as outputs.
-  GPIO_REG(GPIO_INPUT_EN)    &= ~((0x1<< RED_LED_OFFSET) | (0x1<< GREEN_LED_OFFSET) | (0x1 << BLUE_LED_OFFSET)) ;
-  GPIO_REG(GPIO_OUTPUT_EN)   |=  ((0x1<< RED_LED_OFFSET)| (0x1<< GREEN_LED_OFFSET) | (0x1 << BLUE_LED_OFFSET)) ;
-  GPIO_REG(GPIO_OUTPUT_VAL)  |=   (0x1 << BLUE_LED_OFFSET) ;
-  GPIO_REG(GPIO_OUTPUT_VAL)  &=  ~((0x1<< RED_LED_OFFSET) | (0x1<< GREEN_LED_OFFSET)) ;
-
-  // The Buttons and Switches which are used as local interrupt sources
-  // do not go through the GPIO peripheral, so they do not need to
-  // be configured as inputs.
-  
-  // Disable the timer & local interrupts until setup is done (they're
-  // not reset by default)
-  
-  // Unconfigure the CLIC before doing anything
-  for (int i = 0; i < 1024; ++i)
-    CLIC_REG8(CLIC_INTIE + i) = 0;
-
-  // Write down the software interrupt pending bit, as we shouldn't start out
-  // by debouncing anything at all.
-  CLIC_REG(CLIC_MSIP) = 0;
-
-  for (int isr = 0; isr < 32; isr++)
-    localISR[isr] = &unmapped_interrupt;
-  
-  localISR[IRQ_M_SOFT]  = msi_isr;
-  localISR[IRQ_M_TIMER] = mti_isr;
-  localISR[IRQ_M_LOCAL + LOCAL_INT_SW_3]  = switch_3_isr;
-  localISR[IRQ_M_LOCAL + LOCAL_INT_BTN_0] = button_0_isr;
-  localISR[IRQ_M_LOCAL + LOCAL_INT_BTN_1] = button_1_isr;
-  localISR[IRQ_M_LOCAL + LOCAL_INT_BTN_2] = button_2_isr;
-  localISR[IRQ_M_LOCAL + LOCAL_INT_BTN_3] = button_3_isr;
-
-  // Set up the CLIC interrupt mechanism
-  CLIC_REG(CLIC_CFG) = 4<<1; // nmBits=0; nlBits=4; nvBits=0
-
-  print_instructions();
-  
-  enable_local_interrupts();
-
-  g_debouncing = 0;
-
-  // Enable SW interrupts as well in this demo.
-  clic_enable(IRQ_M_SOFT);
-  
-  // Enable all global interrupts
-  set_csr(mstatus, MSTATUS_MIE);
-
-  volatile int foo = 1;
-  while(foo){
-    if (g_debouncing){
-      //Trigger a SW interrupt
-      CLIC_REG(CLIC_MSIP) = 1;
-      g_debouncing = 0;
-    }
-  }
-
-  return 0;
-
-}