summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--bsp/sifive-hifive1-revb/README.md13
-rw-r--r--bsp/sifive-hifive1-revb/design.dts196
-rw-r--r--bsp/sifive-hifive1-revb/metal.h388
-rw-r--r--bsp/sifive-hifive1-revb/metal.lds225
-rw-r--r--bsp/sifive-hifive1-revb/settings.mk4
-rw-r--r--bsp/sifive-hifive1/README.md1
-rwxr-xr-xbsp/update-targets.sh2
7 files changed, 827 insertions, 2 deletions
diff --git a/bsp/sifive-hifive1-revb/README.md b/bsp/sifive-hifive1-revb/README.md
new file mode 100644
index 0000000..0cc2af3
--- /dev/null
+++ b/bsp/sifive-hifive1-revb/README.md
@@ -0,0 +1,13 @@
+HiFive1 Rev B is a low-cost, Arduino-compatible development board featuring the Freedom E310. It’s the best way to start prototyping and developing your RISC‑V applications.
+
+This target is ideal for getting familiarize with RISC-V ISA instructions set and freedom-metal libraries. It supports:
+
+- 1 hart with RV32IMAC core
+- 4 hardware breakpoints
+- Physical Memory Protection with 8 regions
+- 16 local interrupts signal that can be connected to off core complex devices
+- Up to 127 PLIC interrupt signals that can be connected to off core complex devices, with 7 priority levels
+- GPIO memory with 16 interrupt lines
+- SPI memory with 1 interrupt line
+- Serial port with 1 interrupt line
+- 1 RGB LEDS
diff --git a/bsp/sifive-hifive1-revb/design.dts b/bsp/sifive-hifive1-revb/design.dts
new file mode 100644
index 0000000..5f1797d
--- /dev/null
+++ b/bsp/sifive-hifive1-revb/design.dts
@@ -0,0 +1,196 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "sifive,hifive1-revb";
+ model = "sifive,hifive1-revb";
+
+ chosen {
+ stdout-path = "/soc/serial@10013000:115200";
+ metal,entry = <&spi0 0x100000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "sifive,fe310-g000";
+ L6: cpu@0 {
+ clocks = <&hfclk>;
+ compatible = "sifive,rocket0", "riscv";
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <16384>;
+ next-level-cache = <&spi0>;
+ reg = <0>;
+ riscv,isa = "rv32imac";
+ sifive,dtim = <&dtim>;
+ status = "okay";
+ timebase-frequency = <1000000>;
+ hardware-exec-breakpoint-count = <4>;
+ hlic: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #clock-cells = <1>;
+ compatible = "sifive,hifive1";
+ ranges;
+
+ pmp: pmp@0 {
+ compatible = "riscv,pmp";
+ regions = <8>;
+ };
+
+ hfxoscin: clock@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <16000000>;
+ };
+ hfxoscout: clock@1 {
+ compatible = "sifive,fe310-g000,hfxosc";
+ clocks = <&hfxoscin>;
+ reg = <&prci 0x4>;
+ reg-names = "config";
+ };
+ hfroscin: clock@2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <72000000>;
+ };
+ hfroscout: clock@3 {
+ compatible = "sifive,fe310-g000,hfrosc";
+ clocks = <&hfroscin>;
+ reg = <&prci 0x0>;
+ reg-names = "config";
+ };
+ hfclk: clock@4 {
+ compatible = "sifive,fe310-g000,pll";
+ clocks = <&hfxoscout &hfroscout>;
+ clock-names = "pllref", "pllsel0";
+ reg = <&prci 0x8 &prci 0xc>;
+ reg-names = "config", "divider";
+ clock-frequency = <16000000>;
+ };
+
+ lfroscin: clock@5 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000000>;
+ };
+ lfclk: clock@6 {
+ compatible = "sifive,fe310-g000,lfrosc";
+ clocks = <&lfroscin>;
+ reg = <&aon 0x70>;
+ reg-names = "config";
+ };
+
+ aon: aon@10000000 {
+ compatible = "sifive,aon0";
+ reg = <0x10000000 0x8000>;
+ reg-names = "mem";
+ };
+
+ prci: prci@10008000 {
+ compatible = "sifive,fe310-g000,prci";
+ reg = <0x10008000 0x8000>;
+ reg-names = "mem";
+ };
+
+ clint: clint@2000000 {
+ compatible = "riscv,clint0";
+ interrupts-extended = <&hlic 3 &hlic 7>;
+ reg = <0x2000000 0x10000>;
+ reg-names = "control";
+ };
+ local-external-interrupts-0 {
+ compatible = "sifive,local-external-interrupts0";
+ interrupt-parent = <&hlic>;
+ interrupts = <16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31>;
+ };
+ plic: interrupt-controller@c000000 {
+ #interrupt-cells = <1>;
+ compatible = "riscv,plic0";
+ interrupt-controller;
+ interrupts-extended = <&hlic 11>;
+ reg = <0xc000000 0x4000000>;
+ reg-names = "control";
+ riscv,max-priority = <7>;
+ riscv,ndev = <26>;
+ };
+ global-external-interrupts {
+ compatile = "sifive,global-external-interrupts0";
+ interrupt-parent = <&plic>;
+ interrupts = <1 2 3 4>;
+ };
+
+ debug-controller@0 {
+ compatible = "sifive,debug-011", "riscv,debug-011";
+ interrupts-extended = <&hlic 65535>;
+ reg = <0x0 0x100>;
+ reg-names = "control";
+ };
+
+ maskrom@1000 {
+ reg = <0x1000 0x2000>;
+ reg-names = "mem";
+ };
+ otp@20000 {
+ reg = <0x20000 0x2000 0x10010000 0x1000>;
+ reg-names = "mem", "control";
+ };
+
+ dtim: dtim@80000000 {
+ compatible = "sifive,dtim0";
+ reg = <0x80000000 0x4000>;
+ reg-names = "mem";
+ };
+
+ pwm@10015000 {
+ compatible = "sifive,pwm0";
+ interrupt-parent = <&plic>;
+ interrupts = <23 24 25 26>;
+ reg = <0x10015000 0x1000>;
+ reg-names = "control";
+ };
+ gpio0: gpio@10012000 {
+ compatible = "sifive,gpio0";
+ interrupt-parent = <&plic>;
+ interrupts = <7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22>;
+ reg = <0x10012000 0x1000>;
+ reg-names = "control";
+ };
+ uart0: serial@10013000 {
+ compatible = "sifive,uart0";
+ interrupt-parent = <&plic>;
+ interrupts = <5>;
+ reg = <0x10013000 0x1000>;
+ reg-names = "control";
+ clocks = <&hfclk>;
+ pinmux = <&gpio0 0x30000 0x30000>;
+ };
+ spi0: spi@10014000 {
+ compatible = "sifive,spi0";
+ interrupt-parent = <&plic>;
+ interrupts = <6>;
+ reg = <0x10014000 0x1000 0x20000000 0x20000000>;
+ reg-names = "control", "mem";
+ clocks = <&hfclk>;
+ pinmux = <&gpio0 0x0003C 0x0003C>;
+ };
+ i2c0: i2c@10016000 {
+ compatible = "sifive,i2c0";
+ interrupt-parent = <&plic>;
+ interrupts = <52>;
+ reg = <0x10016000 0x1000>;
+ reg-names = "control";
+ };
+ };
+};
diff --git a/bsp/sifive-hifive1-revb/metal.h b/bsp/sifive-hifive1-revb/metal.h
new file mode 100644
index 0000000..4d74b17
--- /dev/null
+++ b/bsp/sifive-hifive1-revb/metal.h
@@ -0,0 +1,388 @@
+#ifndef ASSEMBLY
+
+#ifndef SIFIVE_HIFIVE1_REVB__METAL_H
+#define SIFIVE_HIFIVE1_REVB__METAL_H
+
+#ifdef __METAL_MACHINE_MACROS
+
+#ifndef __METAL_CLIC_SUBINTERRUPTS
+#define __METAL_CLIC_SUBINTERRUPTS 0
+#endif
+
+#else /* ! __METAL_MACHINE_MACROS */
+
+#define __METAL_CLINT_2000000_INTERRUPTS 2
+
+#define METAL_MAX_CLINT_INTERRUPTS 2
+
+#define __METAL_INTERRUPT_CONTROLLER_C000000_INTERRUPTS 1
+
+#define METAL_MAX_PLIC_INTERRUPTS 1
+
+#define METAL_MAX_CLIC_INTERRUPTS 0
+
+#define __METAL_LOCAL_EXTERNAL_INTERRUPTS_0_INTERRUPTS 16
+
+#define METAL_MAX_LOCAL_EXT_INTERRUPTS 16
+
+#define METAL_MAX_GLOBAL_EXT_INTERRUPTS 0
+
+#define __METAL_GPIO_10012000_INTERRUPTS 16
+
+#define METAL_MAX_GPIO_INTERRUPTS 16
+
+#define __METAL_SERIAL_10013000_INTERRUPTS 1
+
+#define METAL_MAX_UART_INTERRUPTS 1
+
+
+#include <metal/drivers/fixed-clock.h>
+#include <metal/drivers/riscv,clint0.h>
+#include <metal/drivers/riscv,cpu.h>
+#include <metal/drivers/riscv,plic0.h>
+#include <metal/pmp.h>
+#include <metal/drivers/sifive,local-external-interrupts0.h>
+#include <metal/drivers/sifive,gpio0.h>
+#include <metal/drivers/sifive,spi0.h>
+#include <metal/drivers/sifive,uart0.h>
+#include <metal/drivers/sifive,fe310-g000,hfrosc.h>
+#include <metal/drivers/sifive,fe310-g000,hfxosc.h>
+#include <metal/drivers/sifive,fe310-g000,pll.h>
+#include <metal/drivers/sifive,fe310-g000,prci.h>
+
+/* From clock@0 */
+asm (".weak __metal_dt_clock_0");
+struct __metal_driver_fixed_clock __metal_dt_clock_0;
+
+/* From clock@2 */
+asm (".weak __metal_dt_clock_2");
+struct __metal_driver_fixed_clock __metal_dt_clock_2;
+
+/* From clock@5 */
+asm (".weak __metal_dt_clock_5");
+struct __metal_driver_fixed_clock __metal_dt_clock_5;
+
+/* From clint@2000000 */
+asm (".weak __metal_dt_clint_2000000");
+struct __metal_driver_riscv_clint0 __metal_dt_clint_2000000;
+
+/* From cpu@0 */
+asm (".weak __metal_dt_cpu_0");
+struct __metal_driver_cpu __metal_dt_cpu_0;
+
+/* From interrupt_controller */
+asm (".weak __metal_dt_interrupt_controller");
+struct __metal_driver_riscv_cpu_intc __metal_dt_interrupt_controller;
+
+/* From interrupt_controller@c000000 */
+asm (".weak __metal_dt_interrupt_controller_c000000");
+struct __metal_driver_riscv_plic0 __metal_dt_interrupt_controller_c000000;
+
+asm (".weak __metal_dt_pmp_0");
+struct metal_pmp __metal_dt_pmp_0;
+
+/* From local_external_interrupts_0 */
+asm (".weak __metal_dt_local_external_interrupts_0");
+struct __metal_driver_sifive_local_external_interrupts0 __metal_dt_local_external_interrupts_0;
+
+/* From gpio@10012000 */
+asm (".weak __metal_dt_gpio_10012000");
+struct __metal_driver_sifive_gpio0 __metal_dt_gpio_10012000;
+
+/* From spi@10014000 */
+asm (".weak __metal_dt_spi_10014000");
+struct __metal_driver_sifive_spi0 __metal_dt_spi_10014000;
+
+/* From serial@10013000 */
+asm (".weak __metal_dt_serial_10013000");
+struct __metal_driver_sifive_uart0 __metal_dt_serial_10013000;
+
+/* From clock@3 */
+asm (".weak __metal_dt_clock_3");
+struct __metal_driver_sifive_fe310_g000_hfrosc __metal_dt_clock_3;
+
+/* From clock@1 */
+asm (".weak __metal_dt_clock_1");
+struct __metal_driver_sifive_fe310_g000_hfxosc __metal_dt_clock_1;
+
+/* From clock@4 */
+asm (".weak __metal_dt_clock_4");
+struct __metal_driver_sifive_fe310_g000_pll __metal_dt_clock_4;
+
+/* From prci@10008000 */
+asm (".weak __metal_dt_prci_10008000");
+struct __metal_driver_sifive_fe310_g000_prci __metal_dt_prci_10008000;
+
+
+/* From clock@0 */
+struct __metal_driver_fixed_clock __metal_dt_clock_0 = {
+ .vtable = &__metal_driver_vtable_fixed_clock,
+ .clock.vtable = &__metal_driver_vtable_fixed_clock.clock,
+ .rate = 16000000UL,
+};
+
+/* From clock@2 */
+struct __metal_driver_fixed_clock __metal_dt_clock_2 = {
+ .vtable = &__metal_driver_vtable_fixed_clock,
+ .clock.vtable = &__metal_driver_vtable_fixed_clock.clock,
+ .rate = 72000000UL,
+};
+
+/* From clock@5 */
+struct __metal_driver_fixed_clock __metal_dt_clock_5 = {
+ .vtable = &__metal_driver_vtable_fixed_clock,
+ .clock.vtable = &__metal_driver_vtable_fixed_clock.clock,
+ .rate = 32000000UL,
+};
+
+/* From clint@2000000 */
+struct __metal_driver_riscv_clint0 __metal_dt_clint_2000000 = {
+ .vtable = &__metal_driver_vtable_riscv_clint0,
+ .controller.vtable = &__metal_driver_vtable_riscv_clint0.clint_vtable,
+ .control_base = 33554432UL,
+ .control_size = 65536UL,
+ .init_done = 0,
+ .num_interrupts = METAL_MAX_CLINT_INTERRUPTS,
+ .interrupt_parent = &__metal_dt_interrupt_controller.controller,
+ .interrupt_lines[0] = 3,
+ .interrupt_lines[1] = 7,
+};
+
+/* From cpu@0 */
+struct __metal_driver_cpu __metal_dt_cpu_0 = {
+ .vtable = &__metal_driver_vtable_cpu,
+ .cpu.vtable = &__metal_driver_vtable_cpu.cpu_vtable,
+ .timebase = 1000000UL,
+ .interrupt_controller = &__metal_dt_interrupt_controller.controller,
+};
+
+/* From interrupt_controller */
+struct __metal_driver_riscv_cpu_intc __metal_dt_interrupt_controller = {
+ .vtable = &__metal_driver_vtable_riscv_cpu_intc,
+ .controller.vtable = &__metal_driver_vtable_riscv_cpu_intc.controller_vtable,
+ .init_done = 0,
+ .interrupt_controller = 1,
+};
+
+/* From interrupt_controller@c000000 */
+struct __metal_driver_riscv_plic0 __metal_dt_interrupt_controller_c000000 = {
+ .vtable = &__metal_driver_vtable_riscv_plic0,
+ .controller.vtable = &__metal_driver_vtable_riscv_plic0.plic_vtable,
+ .init_done = 0,
+/* From interrupt_controller */
+ .interrupt_parent = &__metal_dt_interrupt_controller.controller,
+ .interrupt_line = 11UL,
+ .control_base = 201326592UL,
+ .control_size = 67108864UL,
+ .max_priority = 7UL,
+ .num_interrupts = 26UL,
+ .interrupt_controller = 1,
+};
+
+/* From pmp@0 */
+struct metal_pmp __metal_dt_pmp_0 = {
+ .num_regions = 8UL,
+};
+
+/* From local_external_interrupts_0 */
+struct __metal_driver_sifive_local_external_interrupts0 __metal_dt_local_external_interrupts_0 = {
+ .vtable = &__metal_driver_vtable_sifive_local_external_interrupts0,
+ .irc.vtable = &__metal_driver_vtable_sifive_local_external_interrupts0.local0_vtable,
+ .init_done = 0,
+/* From interrupt_controller */
+ .interrupt_parent = &__metal_dt_interrupt_controller.controller,
+ .num_interrupts = METAL_MAX_LOCAL_EXT_INTERRUPTS,
+ .interrupt_lines[0] = 16,
+ .interrupt_lines[1] = 17,
+ .interrupt_lines[2] = 18,
+ .interrupt_lines[3] = 19,
+ .interrupt_lines[4] = 20,
+ .interrupt_lines[5] = 21,
+ .interrupt_lines[6] = 22,
+ .interrupt_lines[7] = 23,
+ .interrupt_lines[8] = 24,
+ .interrupt_lines[9] = 25,
+ .interrupt_lines[10] = 26,
+ .interrupt_lines[11] = 27,
+ .interrupt_lines[12] = 28,
+ .interrupt_lines[13] = 29,
+ .interrupt_lines[14] = 30,
+ .interrupt_lines[15] = 31,
+};
+
+/* From gpio@10012000 */
+struct __metal_driver_sifive_gpio0 __metal_dt_gpio_10012000 = {
+ .vtable = &__metal_driver_vtable_sifive_gpio0,
+ .base = 268509184UL,
+ .size = 4096UL,
+/* From interrupt_controller@c000000 */
+ .interrupt_parent = &__metal_dt_interrupt_controller_c000000.controller,
+ .num_interrupts = METAL_MAX_GPIO_INTERRUPTS,
+ .interrupt_lines[0] = 7,
+ .interrupt_lines[1] = 8,
+ .interrupt_lines[2] = 9,
+ .interrupt_lines[3] = 10,
+ .interrupt_lines[4] = 11,
+ .interrupt_lines[5] = 12,
+ .interrupt_lines[6] = 13,
+ .interrupt_lines[7] = 14,
+ .interrupt_lines[8] = 15,
+ .interrupt_lines[9] = 16,
+ .interrupt_lines[10] = 17,
+ .interrupt_lines[11] = 18,
+ .interrupt_lines[12] = 19,
+ .interrupt_lines[13] = 20,
+ .interrupt_lines[14] = 21,
+ .interrupt_lines[15] = 22,
+};
+
+/* From spi@10014000 */
+struct __metal_driver_sifive_spi0 __metal_dt_spi_10014000 = {
+ .vtable = &__metal_driver_vtable_sifive_spi0,
+ .spi.vtable = &__metal_driver_vtable_sifive_spi0.spi,
+ .control_base = 268517376UL,
+ .control_size = 4096UL,
+/* From clock@4 */
+ .clock = &__metal_dt_clock_4.clock,
+/* From gpio@10012000 */
+ .pinmux = &__metal_dt_gpio_10012000,
+ .pinmux_output_selector = 60UL,
+ .pinmux_source_selector = 60UL,
+};
+
+/* From serial@10013000 */
+struct __metal_driver_sifive_uart0 __metal_dt_serial_10013000 = {
+ .vtable = &__metal_driver_vtable_sifive_uart0,
+ .uart.vtable = &__metal_driver_vtable_sifive_uart0.uart,
+ .control_base = 268513280UL,
+ .control_size = 4096UL,
+/* From clock@4 */
+ .clock = &__metal_dt_clock_4.clock,
+/* From gpio@10012000 */
+ .pinmux = &__metal_dt_gpio_10012000,
+ .pinmux_output_selector = 196608UL,
+ .pinmux_source_selector = 196608UL,
+/* From interrupt_controller@c000000 */
+ .interrupt_parent = &__metal_dt_interrupt_controller_c000000.controller,
+ .num_interrupts = METAL_MAX_UART_INTERRUPTS,
+ .interrupt_line = 5UL,
+};
+
+/* From clock@3 */
+struct __metal_driver_sifive_fe310_g000_hfrosc __metal_dt_clock_3 = {
+ .vtable = &__metal_driver_vtable_sifive_fe310_g000_hfrosc,
+ .clock.vtable = &__metal_driver_vtable_sifive_fe310_g000_hfrosc.clock,
+/* From clock@2 */
+ .ref = &__metal_dt_clock_2.clock,
+/* From prci@10008000 */
+ .config_base = &__metal_dt_prci_10008000,
+ .config_offset = 0UL,
+};
+
+/* From clock@1 */
+struct __metal_driver_sifive_fe310_g000_hfxosc __metal_dt_clock_1 = {
+ .vtable = &__metal_driver_vtable_sifive_fe310_g000_hfxosc,
+ .clock.vtable = &__metal_driver_vtable_sifive_fe310_g000_hfxosc.clock,
+/* From clock@0 */
+ .ref = &__metal_dt_clock_0.clock,
+/* From prci@10008000 */
+ .config_base = &__metal_dt_prci_10008000,
+ .config_offset = 4UL,
+};
+
+/* From clock@4 */
+struct __metal_driver_sifive_fe310_g000_pll __metal_dt_clock_4 = {
+ .vtable = &__metal_driver_vtable_sifive_fe310_g000_pll,
+ .clock.vtable = &__metal_driver_vtable_sifive_fe310_g000_pll.clock,
+/* From clock@3 */
+ .pllsel0 = &__metal_dt_clock_3.clock,
+/* From clock@1 */
+ .pllref = &__metal_dt_clock_1.clock,
+/* From prci@10008000 */
+ .divider_base = &__metal_dt_prci_10008000,
+ .divider_offset = 12UL,
+/* From prci@10008000 */
+ .config_base = &__metal_dt_prci_10008000,
+ .config_offset = 8UL,
+ .init_rate = 16000000UL,
+};
+
+/* From prci@10008000 */
+struct __metal_driver_sifive_fe310_g000_prci __metal_dt_prci_10008000 = {
+ .vtable = &__metal_driver_vtable_sifive_fe310_g000_prci,
+ .base = 268468224UL,
+ .size = 32768UL,
+};
+
+
+/* From serial@10013000 */
+#define __METAL_DT_STDOUT_UART_HANDLE (&__metal_dt_serial_10013000.uart)
+
+#define __METAL_DT_SERIAL_10013000_HANDLE (&__metal_dt_serial_10013000.uart)
+
+#define __METAL_DT_STDOUT_UART_BAUD 115200
+
+/* From clint@2000000 */
+#define __METAL_DT_RISCV_CLINT0_HANDLE (&__metal_dt_clint_2000000.controller)
+
+#define __METAL_DT_CLINT_2000000_HANDLE (&__metal_dt_clint_2000000.controller)
+
+/* From cpu@0 */
+#define __METAL_DT_RISCV_CPU_HANDLE (&__metal_dt_cpu_0.cpu)
+
+#define __METAL_DT_CPU_0_HANDLE (&__metal_dt_cpu_0.cpu)
+
+#define __METAL_DT_MAX_HARTS 1
+
+asm (".weak __metal_cpu_table");
+struct __metal_driver_cpu *__metal_cpu_table[] = {
+ &__metal_dt_cpu_0};
+
+/* From interrupt_controller */
+#define __METAL_DT_RISCV_CPU_INTC_HANDLE (&__metal_dt_interrupt_controller.controller)
+
+#define __METAL_DT_INTERRUPT_CONTROLLER_HANDLE (&__metal_dt_interrupt_controller.controller)
+
+/* From interrupt_controller@c000000 */
+#define __METAL_DT_RISCV_PLIC0_HANDLE (&__metal_dt_interrupt_controller_c000000.controller)
+
+#define __METAL_DT_INTERRUPT_CONTROLLER_C000000_HANDLE (&__metal_dt_interrupt_controller_c000000.controller)
+
+/* From pmp@0 */
+#define __METAL_DT_PMP_HANDLE (&__metal_dt_pmp_0)
+
+/* From local_external_interrupts_0 */
+#define __METAL_DT_SIFIVE_LOCAL_EXINTR0_HANDLE (&__metal_dt_local_external_interrupts_0.irc)
+
+#define __METAL_DT_LOCAL_EXTERNAL_INTERRUPTS_0_HANDLE (&__metal_dt_local_external_interrupts_0.irc)
+
+#define __METAL_DT_MAX_BUTTONS 0
+
+asm (".weak __metal_button_table");
+struct __metal_driver_sifive_gpio_button *__metal_button_table[] = {
+ NULL };
+#define __METAL_DT_MAX_LEDS 0
+
+asm (".weak __metal_led_table");
+struct __metal_driver_sifive_gpio_led *__metal_led_table[] = {
+ NULL };
+#define __METAL_DT_MAX_SWITCHES 0
+
+asm (".weak __metal_switch_table");
+struct __metal_driver_sifive_gpio_switch *__metal_switch_table[] = {
+ NULL };
+#define __METAL_DT_MAX_SPIS 1
+
+asm (".weak __metal_spi_table");
+struct __metal_driver_sifive_spi0 *__metal_spi_table[] = {
+ &__metal_dt_spi_10014000};
+
+/* From clock@4 */
+#define __METAL_DT_SIFIVE_FE310_G000_PLL_HANDLE (&__metal_dt_clock_4)
+
+#define __METAL_DT_CLOCK_4_HANDLE (&__metal_dt_clock_4)
+
+
+#endif /* ! __METAL_MACHINE_MACROS */
+#endif /* SIFIVE_HIFIVE1_REVB__METAL_H*/
+#endif /* ! ASSEMBLY */
diff --git a/bsp/sifive-hifive1-revb/metal.lds b/bsp/sifive-hifive1-revb/metal.lds
new file mode 100644
index 0000000..fdd23c7
--- /dev/null
+++ b/bsp/sifive-hifive1-revb/metal.lds
@@ -0,0 +1,225 @@
+OUTPUT_ARCH("riscv")
+
+ENTRY(_enter)
+
+MEMORY
+{
+ ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 0x4000
+ flash (rxai!w) : ORIGIN = 0x20400000, LENGTH = 0x20000000
+}
+
+PHDRS
+{
+ flash PT_LOAD;
+ ram_init PT_LOAD;
+ itim_init PT_LOAD;
+ ram PT_NULL;
+ itim PT_NULL;
+}
+
+SECTIONS
+{
+ __stack_size = DEFINED(__stack_size) ? __stack_size : 0x400;
+ __heap_size = DEFINED(__heap_size) ? __heap_size : 0x400;
+
+
+ .init :
+ {
+ KEEP (*(.text.metal.init.enter))
+ KEEP (*(SORT_NONE(.init)))
+ } >flash AT>flash :flash
+
+
+ .text :
+ {
+ *(.text.unlikely .text.unlikely.*)
+ *(.text.startup .text.startup.*)
+ *(.text .text.*)
+ *(.itim .itim.*)
+ *(.gnu.linkonce.t.*)
+ } >flash AT>flash :flash
+
+
+ .fini :
+ {
+ KEEP (*(SORT_NONE(.fini)))
+ } >flash AT>flash :flash
+
+
+ PROVIDE (__etext = .);
+ PROVIDE (_etext = .);
+ PROVIDE (etext = .);
+
+
+ .rodata :
+ {
+ *(.rdata)
+ *(.rodata .rodata.*)
+ *(.gnu.linkonce.r.*)
+ } >flash AT>flash :flash
+
+
+ . = ALIGN(4);
+
+
+ .preinit_array :
+ {
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ } >flash AT>flash :flash
+
+
+ .init_array :
+ {
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+ KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ } >flash AT>flash :flash
+
+
+ .finit_array :
+ {
+ PROVIDE_HIDDEN (__finit_array_start = .);
+ KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+ KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+ PROVIDE_HIDDEN (__finit_array_end = .);
+ } >flash AT>flash :flash
+
+
+ .ctors :
+ {
+ /* gcc uses crtbegin.o to find the start of
+ the constructors, so we make sure it is
+ first. Because this is a wildcard, it
+ doesn't matter if the user does not
+ actually link against crtbegin.o; the
+ linker won't look for a file to match a
+ wildcard. The wildcard also means that it
+ doesn't matter which directory crtbegin.o
+ is in. */
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*crtbegin?.o(.ctors))
+ /* We don't want to include the .ctor section from
+ the crtend.o file until after the sorted ctors.
+ The .ctor section from the crtend file contains the
+ end of ctors marker and it must be last */
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*(.ctors))
+ } >flash AT>flash :flash
+
+
+ .dtors :
+ {
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*crtbegin?.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*(.dtors))
+ } >flash AT>flash :flash
+
+
+ .litimalign :
+ {
+ . = ALIGN(4);
+ PROVIDE( metal_segment_itim_source_start = . );
+ } >flash AT>flash :flash
+
+
+ .ditimalign :
+ {
+ . = ALIGN(4);
+ PROVIDE( metal_segment_itim_target_start = . );
+ } >ram AT>flash :ram_init
+
+
+ .itim :
+ {
+ } >flash AT>flash :flash
+
+
+ . = ALIGN(8);
+ PROVIDE( metal_segment_itim_target_end = . );
+
+
+ .lalign :
+ {
+ . = ALIGN(4);
+ PROVIDE( _data_lma = . );
+ PROVIDE( metal_segment_data_source_start = . );
+ } >flash AT>flash :flash
+
+
+ .dalign :
+ {
+ . = ALIGN(4);
+ PROVIDE( metal_segment_data_target_start = . );
+ } >ram AT>flash :ram_init
+
+
+ .data :
+ {
+ *(.data .data.*)
+ *(.gnu.linkonce.d.*)
+ . = ALIGN(8);
+ PROVIDE( __global_pointer$ = . + 0x800 );
+ *(.sdata .sdata.*)
+ *(.gnu.linkonce.s.*)
+ . = ALIGN(8);
+ *(.srodata.cst16)
+ *(.srodata.cst8)
+ *(.srodata.cst4)
+ *(.srodata.cst2)
+ *(.srodata .srodata.*)
+ } >ram AT>flash :ram_init
+
+
+ . = ALIGN(4);
+ PROVIDE( _edata = . );
+ PROVIDE( edata = . );
+ PROVIDE( metal_segment_data_target_end = . );
+ PROVIDE( _fbss = . );
+ PROVIDE( __bss_start = . );
+ PROVIDE( metal_segment_bss_target_start = . );
+
+
+ .bss :
+ {
+ *(.sbss*)
+ *(.gnu.linkonce.sb.*)
+ *(.bss .bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ . = ALIGN(4);
+ } >ram AT>ram :ram
+
+
+ . = ALIGN(8);
+ PROVIDE( _end = . );
+ PROVIDE( end = . );
+ PROVIDE( metal_segment_bss_target_end = . );
+
+
+ .stack :
+ {
+ PROVIDE(metal_segment_stack_begin = .);
+ . = __stack_size;
+ PROVIDE( _sp = . );
+ PROVIDE(metal_segment_stack_end = .);
+ } >ram AT>ram :ram
+
+
+ .heap :
+ {
+ PROVIDE( metal_segment_heap_target_start = . );
+ . = __heap_size;
+ . = __heap_size == 0 ? 0 : ORIGIN(ram) + LENGTH(ram);
+ PROVIDE( metal_segment_heap_target_end = . );
+ PROVIDE( _heap_end = . );
+ } >ram AT>ram :ram
+
+
+}
+
diff --git a/bsp/sifive-hifive1-revb/settings.mk b/bsp/sifive-hifive1-revb/settings.mk
new file mode 100644
index 0000000..d84238b
--- /dev/null
+++ b/bsp/sifive-hifive1-revb/settings.mk
@@ -0,0 +1,4 @@
+RISCV_ARCH = rv32imac
+RISCV_ABI = ilp32
+RISCV_CMODEL = medlow
+COREIP_MEM_WIDTH = 32
diff --git a/bsp/sifive-hifive1/README.md b/bsp/sifive-hifive1/README.md
index 6311207..d0d0c7a 100644
--- a/bsp/sifive-hifive1/README.md
+++ b/bsp/sifive-hifive1/README.md
@@ -4,7 +4,6 @@ This target is ideal for getting familiarize with RISC-V ISA instructions set an
- 1 hart with RV32IMAC core
- 4 hardware breakpoints
-- Physical Memory Protection with 8 regions
- 16 local interrupts signal that can be connected to off core complex devices
- Up to 127 PLIC interrupt signals that can be connected to off core complex devices, with 7 priority levels
- GPIO memory with 16 interrupt lines
diff --git a/bsp/update-targets.sh b/bsp/update-targets.sh
index 8f094e5..3d7296f 100755
--- a/bsp/update-targets.sh
+++ b/bsp/update-targets.sh
@@ -29,7 +29,7 @@ done
if [[ "$CUSTOM_PATH" == "" && "$CUSTOM_NAME" == "" && "$DTSFILE" == "" ]]
then
TARGET_LIST="$(ls -d coreip*) "
- TARGET_LIST+="sifive-hifive1 freedom-e310-arty "
+ TARGET_LIST+="sifive-hifive1 sifive-hifive1-revb freedom-e310-arty "
else
if [[ ! -f "$DTSFILE" && "$DTSFILE" != "*.dts" ]]
then