diff options
Diffstat (limited to 'bsp/coreip-s76')
-rw-r--r-- | bsp/coreip-s76/README.md | 11 | ||||
-rw-r--r-- | bsp/coreip-s76/design.dts | 92 | ||||
-rw-r--r-- | bsp/coreip-s76/metal.h | 322 | ||||
-rw-r--r-- | bsp/coreip-s76/metal.lds | 223 | ||||
-rw-r--r-- | bsp/coreip-s76/settings.mk | 4 |
5 files changed, 0 insertions, 652 deletions
diff --git a/bsp/coreip-s76/README.md b/bsp/coreip-s76/README.md deleted file mode 100644 index 9623a83..0000000 --- a/bsp/coreip-s76/README.md +++ /dev/null @@ -1,11 +0,0 @@ -The SiFive S76 Standard Core is a high-performance 64-bit embedded processor which is fully-compliant with the RISC-V ISA. - -The S76 is ideal for latency-sensitive applications in domains such as storage and networking that require 64-bit memory addressability (e.g. In-storage Compute, Edge Compute, 5G Modems, Object storage etc.) - -This core target is suitable with Verilog RTL for verification and running application software building on top of freedom-metal libraries. The target supports: - -- 1 hart with RV64IMAFDC core -- 4 hardware breakpoints -- Physical Memory Protection with 8 regions -- 16 local interrupts signal that can be connected to off core complex devices -- Up to 127 PLIC interrupt signals that can be connected to off core complex devices, with 7 priority levels diff --git a/bsp/coreip-s76/design.dts b/bsp/coreip-s76/design.dts deleted file mode 100644 index f27053d..0000000 --- a/bsp/coreip-s76/design.dts +++ /dev/null @@ -1,92 +0,0 @@ -/dts-v1/; - -/ { - #address-cells = <2>; - #size-cells = <2>; - compatible = "SiFive,FS760G-dev", "fs710-dev", "sifive-dev"; - model = "SiFive,FS760G"; - L15: cpus { - #address-cells = <1>; - #size-cells = <0>; - L6: cpu@0 { - clock-frequency = <0>; - compatible = "sifive,bullet0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <128>; - d-cache-size = <32768>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <128>; - i-cache-size = <32768>; - next-level-cache = <&L9>; - reg = <0x0>; - riscv,isa = "rv64imafdc"; - status = "okay"; - timebase-frequency = <1000000>; - hardware-exec-breakpoint-count = <4>; - L4: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - }; - L9: memory@80000000 { - device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x20000000>; - }; - L14: soc { - #address-cells = <2>; - #size-cells = <2>; - compatible = "SiFive,FS760G-soc", "fs710-soc", "sifive-soc", "simple-bus"; - ranges; - L11: axi4-periph-port@20000000 { - #address-cells = <2>; - #size-cells = <2>; - compatible = "sifive,axi4-periph-port", "sifive,axi4-port", "sifive,periph-port", "simple-bus"; - ranges = <0x0 0x20000000 0x0 0x20000000 0x0 0x20000000 0x1 0x0 0x1 0x0 0xf 0x0>; - }; - L10: axi4-sys-port@40000000 { - #address-cells = <2>; - #size-cells = <2>; - compatible = "sifive,axi4-sys-port", "sifive,axi4-port", "sifive,sys-port", "simple-bus"; - ranges = <0x0 0x40000000 0x0 0x40000000 0x0 0x20000000 0x10 0x0 0x10 0x0 0xf0 0x0>; - }; - L2: clint@2000000 { - compatible = "riscv,clint0"; - interrupts-extended = <&L4 3 &L4 7>; - reg = <0x0 0x2000000 0x0 0x10000>; - reg-names = "control"; - }; - L3: debug-controller@0 { - compatible = "sifive,debug-013", "riscv,debug-013"; - interrupts-extended = <&L4 65535>; - reg = <0x0 0x0 0x0 0x1000>; - reg-names = "control"; - }; - L0: error-device@3000 { - compatible = "sifive,error0"; - reg = <0x0 0x3000 0x0 0x1000>; - }; - L8: global-external-interrupts { - compatible = "sifive,global-external-interrupts0"; - interrupt-parent = <&L1>; - interrupts = <1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127>; - }; - L1: interrupt-controller@c000000 { - #interrupt-cells = <1>; - compatible = "riscv,plic0"; - interrupt-controller; - interrupts-extended = <&L4 11>; - reg = <0x0 0xc000000 0x0 0x4000000>; - reg-names = "control"; - riscv,max-priority = <7>; - riscv,ndev = <127>; - }; - L7: teststatus@4000 { - compatible = "sifive,test0"; - reg = <0x0 0x4000 0x0 0x1000>; - reg-names = "control"; - }; - }; -}; diff --git a/bsp/coreip-s76/metal.h b/bsp/coreip-s76/metal.h deleted file mode 100644 index 9a0623e..0000000 --- a/bsp/coreip-s76/metal.h +++ /dev/null @@ -1,322 +0,0 @@ -#ifndef ASSEMBLY - -#ifndef COREIP_S76__METAL_H -#define COREIP_S76__METAL_H - -#ifdef __METAL_MACHINE_MACROS - -#ifndef __METAL_CLIC_SUBINTERRUPTS -#define __METAL_CLIC_SUBINTERRUPTS 0 -#endif - -#else /* ! __METAL_MACHINE_MACROS */ - -#define __METAL_CLINT_2000000_INTERRUPTS 2 - -#define METAL_MAX_CLINT_INTERRUPTS 2 - -#define __METAL_INTERRUPT_CONTROLLER_C000000_INTERRUPTS 1 - -#define METAL_MAX_PLIC_INTERRUPTS 1 - -#define METAL_MAX_CLIC_INTERRUPTS 0 - -#define METAL_MAX_LOCAL_EXT_INTERRUPTS 0 - -#define __METAL_GLOBAL_EXTERNAL_INTERRUPTS_INTERRUPTS 127 - -#define METAL_MAX_GLOBAL_EXT_INTERRUPTS 127 - -#define METAL_MAX_GPIO_INTERRUPTS 0 - -#define METAL_MAX_UART_INTERRUPTS 0 - - -#include <metal/drivers/fixed-clock.h> -#include <metal/drivers/riscv,clint0.h> -#include <metal/drivers/riscv,cpu.h> -#include <metal/drivers/riscv,plic0.h> -#include <metal/pmp.h> -#include <metal/drivers/sifive,global-external-interrupts0.h> -#include <metal/drivers/sifive,test0.h> - -/* From clint@2000000 */ -asm (".weak __metal_dt_clint_2000000"); -struct __metal_driver_riscv_clint0 __metal_dt_clint_2000000; - -/* From cpu@0 */ -asm (".weak __metal_dt_cpu_0"); -struct __metal_driver_cpu __metal_dt_cpu_0; - -/* From interrupt_controller */ -asm (".weak __metal_dt_interrupt_controller"); -struct __metal_driver_riscv_cpu_intc __metal_dt_interrupt_controller; - -/* From interrupt_controller@c000000 */ -asm (".weak __metal_dt_interrupt_controller_c000000"); -struct __metal_driver_riscv_plic0 __metal_dt_interrupt_controller_c000000; - -/* From global_external_interrupts */ -asm (".weak __metal_dt_global_external_interrupts"); -struct __metal_driver_sifive_global_external_interrupts0 __metal_dt_global_external_interrupts; - -/* From teststatus@4000 */ -asm (".weak __metal_dt_teststatus_4000"); -struct __metal_driver_sifive_test0 __metal_dt_teststatus_4000; - - -/* From clint@2000000 */ -struct __metal_driver_riscv_clint0 __metal_dt_clint_2000000 = { - .vtable = &__metal_driver_vtable_riscv_clint0, - .controller.vtable = &__metal_driver_vtable_riscv_clint0.clint_vtable, - .control_base = 33554432UL, - .control_size = 65536UL, - .init_done = 0, - .num_interrupts = METAL_MAX_CLINT_INTERRUPTS, - .interrupt_parent = &__metal_dt_interrupt_controller.controller, - .interrupt_lines[0] = 3, - .interrupt_lines[1] = 7, -}; - -/* From cpu@0 */ -struct __metal_driver_cpu __metal_dt_cpu_0 = { - .vtable = &__metal_driver_vtable_cpu, - .cpu.vtable = &__metal_driver_vtable_cpu.cpu_vtable, - .timebase = 1000000UL, - .interrupt_controller = &__metal_dt_interrupt_controller.controller, -}; - -/* From interrupt_controller */ -struct __metal_driver_riscv_cpu_intc __metal_dt_interrupt_controller = { - .vtable = &__metal_driver_vtable_riscv_cpu_intc, - .controller.vtable = &__metal_driver_vtable_riscv_cpu_intc.controller_vtable, - .init_done = 0, - .interrupt_controller = 1, -}; - -/* From interrupt_controller@c000000 */ -struct __metal_driver_riscv_plic0 __metal_dt_interrupt_controller_c000000 = { - .vtable = &__metal_driver_vtable_riscv_plic0, - .controller.vtable = &__metal_driver_vtable_riscv_plic0.plic_vtable, - .init_done = 0, -/* From interrupt_controller */ - .interrupt_parent = &__metal_dt_interrupt_controller.controller, - .interrupt_line = 11UL, - .control_base = 201326592UL, - .control_size = 67108864UL, - .max_priority = 7UL, - .num_interrupts = 127UL, - .interrupt_controller = 1, -}; - -/* From global_external_interrupts */ -struct __metal_driver_sifive_global_external_interrupts0 __metal_dt_global_external_interrupts = { - .vtable = &__metal_driver_vtable_sifive_global_external_interrupts0, - .irc.vtable = &__metal_driver_vtable_sifive_global_external_interrupts0.global0_vtable, - .init_done = 0, -/* From interrupt_controller@c000000 */ - .interrupt_parent = &__metal_dt_interrupt_controller_c000000.controller, - .num_interrupts = METAL_MAX_GLOBAL_EXT_INTERRUPTS, - .interrupt_lines[0] = 1, - .interrupt_lines[1] = 2, - .interrupt_lines[2] = 3, - .interrupt_lines[3] = 4, - .interrupt_lines[4] = 5, - .interrupt_lines[5] = 6, - .interrupt_lines[6] = 7, - .interrupt_lines[7] = 8, - .interrupt_lines[8] = 9, - .interrupt_lines[9] = 10, - .interrupt_lines[10] = 11, - .interrupt_lines[11] = 12, - .interrupt_lines[12] = 13, - .interrupt_lines[13] = 14, - .interrupt_lines[14] = 15, - .interrupt_lines[15] = 16, - .interrupt_lines[16] = 17, - .interrupt_lines[17] = 18, - .interrupt_lines[18] = 19, - .interrupt_lines[19] = 20, - .interrupt_lines[20] = 21, - .interrupt_lines[21] = 22, - .interrupt_lines[22] = 23, - .interrupt_lines[23] = 24, - .interrupt_lines[24] = 25, - .interrupt_lines[25] = 26, - .interrupt_lines[26] = 27, - .interrupt_lines[27] = 28, - .interrupt_lines[28] = 29, - .interrupt_lines[29] = 30, - .interrupt_lines[30] = 31, - .interrupt_lines[31] = 32, - .interrupt_lines[32] = 33, - .interrupt_lines[33] = 34, - .interrupt_lines[34] = 35, - .interrupt_lines[35] = 36, - .interrupt_lines[36] = 37, - .interrupt_lines[37] = 38, - .interrupt_lines[38] = 39, - .interrupt_lines[39] = 40, - .interrupt_lines[40] = 41, - .interrupt_lines[41] = 42, - .interrupt_lines[42] = 43, - .interrupt_lines[43] = 44, - .interrupt_lines[44] = 45, - .interrupt_lines[45] = 46, - .interrupt_lines[46] = 47, - .interrupt_lines[47] = 48, - .interrupt_lines[48] = 49, - .interrupt_lines[49] = 50, - .interrupt_lines[50] = 51, - .interrupt_lines[51] = 52, - .interrupt_lines[52] = 53, - .interrupt_lines[53] = 54, - .interrupt_lines[54] = 55, - .interrupt_lines[55] = 56, - .interrupt_lines[56] = 57, - .interrupt_lines[57] = 58, - .interrupt_lines[58] = 59, - .interrupt_lines[59] = 60, - .interrupt_lines[60] = 61, - .interrupt_lines[61] = 62, - .interrupt_lines[62] = 63, - .interrupt_lines[63] = 64, - .interrupt_lines[64] = 65, - .interrupt_lines[65] = 66, - .interrupt_lines[66] = 67, - .interrupt_lines[67] = 68, - .interrupt_lines[68] = 69, - .interrupt_lines[69] = 70, - .interrupt_lines[70] = 71, - .interrupt_lines[71] = 72, - .interrupt_lines[72] = 73, - .interrupt_lines[73] = 74, - .interrupt_lines[74] = 75, - .interrupt_lines[75] = 76, - .interrupt_lines[76] = 77, - .interrupt_lines[77] = 78, - .interrupt_lines[78] = 79, - .interrupt_lines[79] = 80, - .interrupt_lines[80] = 81, - .interrupt_lines[81] = 82, - .interrupt_lines[82] = 83, - .interrupt_lines[83] = 84, - .interrupt_lines[84] = 85, - .interrupt_lines[85] = 86, - .interrupt_lines[86] = 87, - .interrupt_lines[87] = 88, - .interrupt_lines[88] = 89, - .interrupt_lines[89] = 90, - .interrupt_lines[90] = 91, - .interrupt_lines[91] = 92, - .interrupt_lines[92] = 93, - .interrupt_lines[93] = 94, - .interrupt_lines[94] = 95, - .interrupt_lines[95] = 96, - .interrupt_lines[96] = 97, - .interrupt_lines[97] = 98, - .interrupt_lines[98] = 99, - .interrupt_lines[99] = 100, - .interrupt_lines[100] = 101, - .interrupt_lines[101] = 102, - .interrupt_lines[102] = 103, - .interrupt_lines[103] = 104, - .interrupt_lines[104] = 105, - .interrupt_lines[105] = 106, - .interrupt_lines[106] = 107, - .interrupt_lines[107] = 108, - .interrupt_lines[108] = 109, - .interrupt_lines[109] = 110, - .interrupt_lines[110] = 111, - .interrupt_lines[111] = 112, - .interrupt_lines[112] = 113, - .interrupt_lines[113] = 114, - .interrupt_lines[114] = 115, - .interrupt_lines[115] = 116, - .interrupt_lines[116] = 117, - .interrupt_lines[117] = 118, - .interrupt_lines[118] = 119, - .interrupt_lines[119] = 120, - .interrupt_lines[120] = 121, - .interrupt_lines[121] = 122, - .interrupt_lines[122] = 123, - .interrupt_lines[123] = 124, - .interrupt_lines[124] = 125, - .interrupt_lines[125] = 126, - .interrupt_lines[126] = 127, -}; - -/* From teststatus@4000 */ -struct __metal_driver_sifive_test0 __metal_dt_teststatus_4000 = { - .vtable = &__metal_driver_vtable_sifive_test0, - .shutdown.vtable = &__metal_driver_vtable_sifive_test0.shutdown, - .base = 16384UL, - .size = 4096UL, -}; - - -/* From clint@2000000 */ -#define __METAL_DT_RISCV_CLINT0_HANDLE (&__metal_dt_clint_2000000.controller) - -#define __METAL_DT_CLINT_2000000_HANDLE (&__metal_dt_clint_2000000.controller) - -/* From cpu@0 */ -#define __METAL_DT_RISCV_CPU_HANDLE (&__metal_dt_cpu_0.cpu) - -#define __METAL_DT_CPU_0_HANDLE (&__metal_dt_cpu_0.cpu) - -#define __METAL_DT_MAX_HARTS 1 - -asm (".weak __metal_cpu_table"); -struct __metal_driver_cpu *__metal_cpu_table[] = { - &__metal_dt_cpu_0}; - -/* From interrupt_controller */ -#define __METAL_DT_RISCV_CPU_INTC_HANDLE (&__metal_dt_interrupt_controller.controller) - -#define __METAL_DT_INTERRUPT_CONTROLLER_HANDLE (&__metal_dt_interrupt_controller.controller) - -/* From interrupt_controller@c000000 */ -#define __METAL_DT_RISCV_PLIC0_HANDLE (&__metal_dt_interrupt_controller_c000000.controller) - -#define __METAL_DT_INTERRUPT_CONTROLLER_C000000_HANDLE (&__metal_dt_interrupt_controller_c000000.controller) - -/* From global_external_interrupts */ -#define __METAL_DT_SIFIVE_GLOBAL_EXINTR0_HANDLE (&__metal_dt_global_external_interrupts.irc) - -#define __METAL_DT_GLOBAL_EXTERNAL_INTERRUPTS_HANDLE (&__metal_dt_global_external_interrupts.irc) - -#define __MEE_DT_MAX_GPIOS 0 - -asm (".weak __metal_gpio_table"); -struct __metal_driver_sifive_gpio0 *__metal_gpio_table[] = { - NULL }; -#define __METAL_DT_MAX_BUTTONS 0 - -asm (".weak __metal_button_table"); -struct __metal_driver_sifive_gpio_button *__metal_button_table[] = { - NULL }; -#define __METAL_DT_MAX_LEDS 0 - -asm (".weak __metal_led_table"); -struct __metal_driver_sifive_gpio_led *__metal_led_table[] = { - NULL }; -#define __METAL_DT_MAX_SWITCHES 0 - -asm (".weak __metal_switch_table"); -struct __metal_driver_sifive_gpio_switch *__metal_switch_table[] = { - NULL }; -#define __METAL_DT_MAX_SPIS 0 - -asm (".weak __metal_spi_table"); -struct __metal_driver_sifive_spi0 *__metal_spi_table[] = { - NULL }; -/* From teststatus@4000 */ -#define __METAL_DT_SHUTDOWN_HANDLE (&__metal_dt_teststatus_4000.shutdown) - -#define __METAL_DT_TESTSTATUS_4000_HANDLE (&__metal_dt_teststatus_4000.shutdown) - - -#endif /* ! __METAL_MACHINE_MACROS */ -#endif /* COREIP_S76__METAL_H*/ -#endif /* ! ASSEMBLY */ diff --git a/bsp/coreip-s76/metal.lds b/bsp/coreip-s76/metal.lds deleted file mode 100644 index 34f97e6..0000000 --- a/bsp/coreip-s76/metal.lds +++ /dev/null @@ -1,223 +0,0 @@ -OUTPUT_ARCH("riscv") - -ENTRY(_enter) - -MEMORY -{ - ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 0x20000000 -} - -PHDRS -{ - flash PT_LOAD; - ram_init PT_LOAD; - itim_init PT_LOAD; - ram PT_LOAD; - itim PT_LOAD; -} - -SECTIONS -{ - __stack_size = DEFINED(__stack_size) ? __stack_size : 0x400; - __heap_size = DEFINED(__heap_size) ? __heap_size : 0x400; - - - .init : - { - KEEP (*(.text.metal.init.enter)) - KEEP (*(SORT_NONE(.init))) - } >ram AT>ram :ram - - - .text : - { - *(.text.unlikely .text.unlikely.*) - *(.text.startup .text.startup.*) - *(.text .text.*) - *(.itim .itim.*) - *(.gnu.linkonce.t.*) - } >ram AT>ram :ram - - - .fini : - { - KEEP (*(SORT_NONE(.fini))) - } >ram AT>ram :ram - - - PROVIDE (__etext = .); - PROVIDE (_etext = .); - PROVIDE (etext = .); - - - .rodata : - { - *(.rdata) - *(.rodata .rodata.*) - *(.gnu.linkonce.r.*) - } >ram AT>ram :ram - - - . = ALIGN(4); - - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >ram AT>ram :ram - - - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*))) - KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors)) - PROVIDE_HIDDEN (__init_array_end = .); - } >ram AT>ram :ram - - - .finit_array : - { - PROVIDE_HIDDEN (__finit_array_start = .); - KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*))) - KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors)) - PROVIDE_HIDDEN (__finit_array_end = .); - } >ram AT>ram :ram - - - .ctors : - { - /* gcc uses crtbegin.o to find the start of - the constructors, so we make sure it is - first. Because this is a wildcard, it - doesn't matter if the user does not - actually link against crtbegin.o; the - linker won't look for a file to match a - wildcard. The wildcard also means that it - doesn't matter which directory crtbegin.o - is in. */ - KEEP (*crtbegin.o(.ctors)) - KEEP (*crtbegin?.o(.ctors)) - /* We don't want to include the .ctor section from - the crtend.o file until after the sorted ctors. - The .ctor section from the crtend file contains the - end of ctors marker and it must be last */ - KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*(.ctors)) - } >ram AT>ram :ram - - - .dtors : - { - KEEP (*crtbegin.o(.dtors)) - KEEP (*crtbegin?.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*(.dtors)) - } >ram AT>ram :ram - - - .litimalign : - { - . = ALIGN(4); - PROVIDE( metal_segment_itim_source_start = . ); - } >ram AT>ram :ram - - - .ditimalign : - { - . = ALIGN(4); - PROVIDE( metal_segment_itim_target_start = . ); - } >ram AT>ram :ram_init - - - .itim : - { - } >ram AT>ram :ram_init - - - . = ALIGN(8); - PROVIDE( metal_segment_itim_target_end = . ); - - - .lalign : - { - . = ALIGN(4); - PROVIDE( _data_lma = . ); - PROVIDE( metal_segment_data_source_start = . ); - } >ram AT>ram :ram - - - .dalign : - { - . = ALIGN(4); - PROVIDE( metal_segment_data_target_start = . ); - } >ram AT>ram :ram_init - - - .data : - { - *(.data .data.*) - *(.gnu.linkonce.d.*) - . = ALIGN(8); - PROVIDE( __global_pointer$ = . + 0x800 ); - *(.sdata .sdata.*) - *(.gnu.linkonce.s.*) - . = ALIGN(8); - *(.srodata.cst16) - *(.srodata.cst8) - *(.srodata.cst4) - *(.srodata.cst2) - *(.srodata .srodata.*) - } >ram AT>ram :ram_init - - - . = ALIGN(4); - PROVIDE( _edata = . ); - PROVIDE( edata = . ); - PROVIDE( metal_segment_data_target_end = . ); - PROVIDE( _fbss = . ); - PROVIDE( __bss_start = . ); - PROVIDE( metal_segment_bss_target_start = . ); - - - .bss : - { - *(.sbss*) - *(.gnu.linkonce.sb.*) - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - . = ALIGN(4); - } >ram AT>ram :ram - - - . = ALIGN(8); - PROVIDE( _end = . ); - PROVIDE( end = . ); - PROVIDE( metal_segment_bss_target_end = . ); - - - .stack : - { - PROVIDE(metal_segment_stack_begin = .); - . = __stack_size; - PROVIDE( _sp = . ); - PROVIDE(metal_segment_stack_end = .); - } >ram AT>ram :ram - - - .heap : - { - PROVIDE( metal_segment_heap_target_start = . ); - . = __heap_size; - PROVIDE( metal_segment_heap_target_end = . ); - PROVIDE( _heap_end = . ); - } >ram AT>ram :ram - - -} - diff --git a/bsp/coreip-s76/settings.mk b/bsp/coreip-s76/settings.mk deleted file mode 100644 index a7d8dfa..0000000 --- a/bsp/coreip-s76/settings.mk +++ /dev/null @@ -1,4 +0,0 @@ -RISCV_ARCH=rv64imac -RISCV_ABI=lp64 -RISCV_CMODEL=medany -COREIP_MEM_WIDTH=64 |