summaryrefslogtreecommitdiff
path: root/bsp/drivers/fe300prci/fe300prci_driver.c
diff options
context:
space:
mode:
Diffstat (limited to 'bsp/drivers/fe300prci/fe300prci_driver.c')
-rw-r--r--bsp/drivers/fe300prci/fe300prci_driver.c252
1 files changed, 0 insertions, 252 deletions
diff --git a/bsp/drivers/fe300prci/fe300prci_driver.c b/bsp/drivers/fe300prci/fe300prci_driver.c
deleted file mode 100644
index 8eeaafc..0000000
--- a/bsp/drivers/fe300prci/fe300prci_driver.c
+++ /dev/null
@@ -1,252 +0,0 @@
-// See LICENSE file for license details
-
-#include "platform.h"
-
-#ifdef PRCI_CTRL_ADDR
-#include "fe300prci/fe300prci_driver.h"
-#include <unistd.h>
-
-#define rdmcycle(x) { \
- uint32_t lo, hi, hi2; \
- __asm__ __volatile__ ("1:\n\t" \
- "csrr %0, mcycleh\n\t" \
- "csrr %1, mcycle\n\t" \
- "csrr %2, mcycleh\n\t" \
- "bne %0, %2, 1b\n\t" \
- : "=r" (hi), "=r" (lo), "=r" (hi2)) ; \
- *(x) = lo | ((uint64_t) hi << 32); \
- }
-
-uint32_t PRCI_measure_mcycle_freq(uint32_t mtime_ticks, uint32_t mtime_freq)
-{
-
- uint32_t start_mtime = CLINT_REG(CLINT_MTIME);
- uint32_t end_mtime = start_mtime + mtime_ticks + 1;
-
- // Make sure we won't get rollover.
- while (end_mtime < start_mtime){
- start_mtime = CLINT_REG(CLINT_MTIME);
- end_mtime = start_mtime + mtime_ticks + 1;
- }
-
- // Don't start measuring until mtime edge.
- uint32_t tmp = start_mtime;
- do {
- start_mtime = CLINT_REG(CLINT_MTIME);
- } while (start_mtime == tmp);
-
- uint64_t start_mcycle;
- rdmcycle(&start_mcycle);
-
- while (CLINT_REG(CLINT_MTIME) < end_mtime) ;
-
- uint64_t end_mcycle;
- rdmcycle(&end_mcycle);
- uint32_t difference = (uint32_t) (end_mcycle - start_mcycle);
-
- uint64_t freq = ((uint64_t) difference * mtime_freq) / mtime_ticks;
- return (uint32_t) freq & 0xFFFFFFFF;
-
-}
-
-
-void PRCI_use_hfrosc(int div, int trim)
-{
- // Make sure the HFROSC is running at its default setting
- // It is OK to change this even if we are running off of it.
-
- PRCI_REG(PRCI_HFROSCCFG) = (ROSC_DIV(div) | ROSC_TRIM(trim) | ROSC_EN(1));
-
- while ((PRCI_REG(PRCI_HFROSCCFG) & ROSC_RDY(1)) == 0);
-
- PRCI_REG(PRCI_PLLCFG) &= ~PLL_SEL(1);
-}
-
-void PRCI_use_pll(int refsel, int bypass,
- int r, int f, int q, int finaldiv,
- int hfroscdiv, int hfrosctrim)
-{
- // Ensure that we aren't running off the PLL before we mess with it.
- if (PRCI_REG(PRCI_PLLCFG) & PLL_SEL(1)) {
- // Make sure the HFROSC is running at its default setting
- PRCI_use_hfrosc(4, 16);
- }
-
- // Set PLL Source to be HFXOSC if desired.
- uint32_t config_value = 0;
-
- config_value |= PLL_REFSEL(refsel);
-
- if (bypass) {
- // Bypass
- config_value |= PLL_BYPASS(1);
-
- PRCI_REG(PRCI_PLLCFG) = config_value;
-
- // If we don't have an HFXTAL, this doesn't really matter.
- // Set our Final output divide to divide-by-1:
- PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
- } else {
-
- // To overclock, use the hfrosc
- if (hfrosctrim >= 0 && hfroscdiv >= 0) {
- PRCI_use_hfrosc(hfroscdiv, hfrosctrim);
- }
-
- // Set DIV Settings for PLL
-
- // (Legal values of f_REF are 6-48MHz)
-
- // Set DIVR to divide-by-2 to get 8MHz frequency
- // (legal values of f_R are 6-12 MHz)
-
- config_value |= PLL_BYPASS(1);
- config_value |= PLL_R(r);
-
- // Set DIVF to get 512Mhz frequncy
- // There is an implied multiply-by-2, 16Mhz.
- // So need to write 32-1
- // (legal values of f_F are 384-768 MHz)
- config_value |= PLL_F(f);
-
- // Set DIVQ to divide-by-2 to get 256 MHz frequency
- // (legal values of f_Q are 50-400Mhz)
- config_value |= PLL_Q(q);
-
- // Set our Final output divide to divide-by-1:
- if (finaldiv == 1){
- PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
- } else {
- PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV(finaldiv-1));
- }
-
- PRCI_REG(PRCI_PLLCFG) = config_value;
-
- // Un-Bypass the PLL.
- PRCI_REG(PRCI_PLLCFG) &= ~PLL_BYPASS(1);
-
- // Wait for PLL Lock
- // Note that the Lock signal can be glitchy.
- // Need to wait 100 us
- // RTC is running at 32kHz.
- // So wait 4 ticks of RTC.
- uint32_t now = CLINT_REG(CLINT_MTIME);
- while (CLINT_REG(CLINT_MTIME) - now < 4) ;
-
- // Now it is safe to check for PLL Lock
- while ((PRCI_REG(PRCI_PLLCFG) & PLL_LOCK(1)) == 0);
-
- }
-
- // Switch over to PLL Clock source
- PRCI_REG(PRCI_PLLCFG) |= PLL_SEL(1);
-
- // If we're running off HFXOSC, turn off the HFROSC to
- // save power.
- if (refsel) {
- PRCI_REG(PRCI_HFROSCCFG) &= ~ROSC_EN(1);
- }
-
-}
-
-void PRCI_use_default_clocks()
-{
- // Turn off the LFROSC
- AON_REG(AON_LFROSC) &= ~ROSC_EN(1);
-
- // Use HFROSC
- PRCI_use_hfrosc(4, 16);
-}
-
-void PRCI_use_hfxosc(uint32_t finaldiv)
-{
-
- PRCI_use_pll(1, // Use HFXTAL
- 1, // Bypass = 1
- 0, // PLL settings don't matter
- 0, // PLL settings don't matter
- 0, // PLL settings don't matter
- finaldiv,
- -1,
- -1);
-}
-
-// This is a generic function, which
-// doesn't span the entire range of HFROSC settings.
-// It only adjusts the trim, which can span a hundred MHz or so.
-// This function does not check the legality of the PLL settings
-// at all, and it is quite possible to configure invalid PLL settings
-// this way.
-// It returns the actual measured CPU frequency.
-
-uint32_t PRCI_set_hfrosctrim_for_f_cpu(uint32_t f_cpu, PRCI_freq_target target )
-{
-
- uint32_t hfrosctrim = 0;
- uint32_t hfroscdiv = 4;
- uint32_t prev_trim = 0;
-
- // In this function we use PLL settings which
- // will give us a 32x multiplier from the output
- // of the HFROSC source to the output of the
- // PLL. We first measure our HFROSC to get the
- // right trim, then finally use it as the PLL source.
- // We should really check here that the f_cpu
- // requested is something in the limit of the PLL. For
- // now that is up to the user.
-
- // This will undershoot for frequencies not divisible by 16.
- uint32_t desired_hfrosc_freq = (f_cpu/ 16);
-
- PRCI_use_hfrosc(hfroscdiv, hfrosctrim);
-
- // Ignore the first run (for icache reasons)
- uint32_t cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ);
-
- cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ);
- uint32_t prev_freq = cpu_freq;
-
- while ((cpu_freq < desired_hfrosc_freq) && (hfrosctrim < 0x1F)){
- prev_trim = hfrosctrim;
- prev_freq = cpu_freq;
- hfrosctrim ++;
- PRCI_use_hfrosc(hfroscdiv, hfrosctrim);
- cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ);
- }
-
- // We couldn't go low enough
- if (prev_freq > desired_hfrosc_freq){
- PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
- cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ);
- return cpu_freq;
- }
-
- // We couldn't go high enough
- if (cpu_freq < desired_hfrosc_freq){
- PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
- cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ);
- return cpu_freq;
- }
-
- // Check for over/undershoot
- switch(target) {
- case(PRCI_FREQ_CLOSEST):
- if ((desired_hfrosc_freq - prev_freq) < (cpu_freq - desired_hfrosc_freq)) {
- PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
- } else {
- PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, hfrosctrim);
- }
- break;
- case(PRCI_FREQ_UNDERSHOOT):
- PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
- break;
- default:
- PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, hfrosctrim);
- }
-
- cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ);
- return cpu_freq;
-
-}
-
-#endif
generated by cgit v1.2.1-18-gbd029 (git 2.20.0) at 2024-05-10 08:20:42 +0000