diff options
Diffstat (limited to 'bsp/env/freedom-e300-hifive1')
| -rw-r--r-- | bsp/env/freedom-e300-hifive1/openocd.cfg | 19 |
1 files changed, 16 insertions, 3 deletions
diff --git a/bsp/env/freedom-e300-hifive1/openocd.cfg b/bsp/env/freedom-e300-hifive1/openocd.cfg index 9a260ed..2eb0490 100644 --- a/bsp/env/freedom-e300-hifive1/openocd.cfg +++ b/bsp/env/freedom-e300-hifive1/openocd.cfg @@ -5,7 +5,12 @@ ftdi_device_desc "Dual RS232-HS" ftdi_vid_pid 0x0403 0x6010 ftdi_layout_init 0x0008 0x001b -ftdi_layout_signal nSRST -oe 0x0020 +ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020 + +#Reset Stretcher logic on FE310 is ~1 second long +#This doesn't apply if you use +# ftdi_set_signal, but still good to document +adapter_nsrst_delay 1500 set _CHIPNAME riscv jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913 @@ -14,8 +19,16 @@ set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME riscv -chain-position $_TARGETNAME $_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1 -flash bank my_first_flash fespi 0x20000000 0 0 0 $_TARGETNAME +flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME init -#reset +#reset -- This type of reset is not implemented yet +if {[ info exists pulse_srst]} { + ftdi_set_signal nSRST 0 + ftdi_set_signal nSRST z + #Wait for the reset stretcher + #It will work without this, but + #will incur lots of delays for later commands. + sleep 1500 +} halt flash protect 0 64 last off |