diff options
Diffstat (limited to 'software/clic_vectored')
| -rw-r--r-- | software/clic_vectored/Makefile | 10 | ||||
| -rw-r--r-- | software/clic_vectored/clic_vectored.c | 197 |
2 files changed, 207 insertions, 0 deletions
diff --git a/software/clic_vectored/Makefile b/software/clic_vectored/Makefile new file mode 100644 index 0000000..d6e2342 --- /dev/null +++ b/software/clic_vectored/Makefile @@ -0,0 +1,10 @@ +TARGET = clic_vectored +CFLAGS += -Og -fno-builtin-printf + +BSP_BASE = ../../bsp + +C_SRCS += clic_vectored.c + +C_SRCS += $(BSP_BASE)/drivers/clic/clic_driver.c + +include $(BSP_BASE)/env/common.mk diff --git a/software/clic_vectored/clic_vectored.c b/software/clic_vectored/clic_vectored.c new file mode 100644 index 0000000..37ea723 --- /dev/null +++ b/software/clic_vectored/clic_vectored.c @@ -0,0 +1,197 @@ +// See LICENSE for license details. +#include <stdio.h> +#include <stdlib.h> +#include "platform.h" +#include <string.h> +#include "encoding.h" +#include <unistd.h> +#include "sifive/devices/clic.h" +#include "clic/clic_driver.h" +#include "sifive/devices/clint.h" + +#ifndef _SIFIVE_COREPLEXIP_ARTY_H +#error 'local_interrupts' demo only supported for Core IP Eval Kits +#endif + +// Global Variable used to show +// software interrupts. +volatile uint32_t g_debouncing; + +// vector table defined in init.c +typedef void (*interrupt_function_ptr_t) (void); +extern interrupt_function_ptr_t localISR[CLIC_NUM_INTERRUPTS]; +extern void default_handler(void); + +//clic data structure +clic_instance_t clic; + +const char * instructions_msg = " \ +\n\ + SiFive, Inc\n\ +\n\ + 5555555555555555555555555\n\ + 5555 5555\n\ + 5555 5555\n\ + 5555 5555\n\ + 5555 5555555555555555555555\n\ + 5555 555555555555555555555555\n\ + 5555 5555\n\ + 5555 5555\n\ + 5555 5555\n\ +5555555555555555555555555555 55555\n\ + 55555 555555555 55555\n\ + 55555 55555 55555\n\ + 55555 5 55555\n\ + 55555 55555\n\ + 55555 55555\n\ + 55555 55555\n\ + 55555 55555\n\ + 55555 55555\n\ + 555555555\n\ + 55555\n\ + 5\n\ +\n\ +E2 Core IP Eval Kit 'clic_vectored' demo.\n\ +This demo uses buttons 0, 1, and 2 on the\n\ +Arty board to trigger vectored clic interrupts.\n\ +The higher the button number, the higher the\n\ +interupt priority. Button 0's handler runs for\n\ +10 seconds, button 1's for 5, and button 2's for 1.\n\ +Preemption is enabled so that higher priority\n\ +interrupts can be triggered while in low priority\n\ +handlers. The demo also uses the CLIC's software\n\ +interrupt to pend a lower priority interrupt from\n\ +button 2's handler.\n\ +\n\ +Note the buttons are wired directly into the local\n\ +interrupts, so a given interrupt will stay asserted\n\ +as long as the button is being pushed.\n\ +\n\ +This demo works for both the E20 and E21 FPGA\n\ +as long as CLIC_CONFIG_BITS matches the desired\n\ +core.\n\ +\n"; + +void print_instructions() { + write (STDERR_FILENO, instructions_msg, strlen(instructions_msg)); +} + + +//busy wait for the specified time +void wait_ms(uint64_t ms) { + static const uint64_t ms_tick = RTC_FREQ/1000; + volatile uint64_t * mtime = (uint64_t*) (CLINT_CTRL_ADDR + CLINT_MTIME); + uint64_t then = (ms_tick * ms) + *mtime; + while(*mtime<then); +} + +void button_0_isr(void) __attribute__((interrupt("SiFive-CLIC-preemptible"))); +void button_0_isr(void) { + // Toggle Red LED + uint8_t level = clic_get_int_level(&clic, (LOCALINTIDBASE + LOCAL_INT_BTN_0)); + printf("Button 0 was pressed, interrupt level %d. Toggle Red.\n", level); + GPIO_REG(GPIO_OUTPUT_VAL) = GPIO_REG(GPIO_OUTPUT_VAL) ^ (0x1 << RED_LED_OFFSET); + wait_ms(10000); + GPIO_REG(GPIO_OUTPUT_VAL) = GPIO_REG(GPIO_OUTPUT_VAL) ^ (0x1 << RED_LED_OFFSET); +} + +void button_0_setup(void) { + clic_install_handler(&clic, (LOCALINTIDBASE + LOCAL_INT_BTN_0), button_0_isr); + clic_set_int_level(&clic, (LOCALINTIDBASE + LOCAL_INT_BTN_0), 1); + clic_enable_interrupt(&clic, (LOCALINTIDBASE + LOCAL_INT_BTN_0)); +} + +void button_1_isr(void) __attribute__((interrupt("SiFive-CLIC-preemptible"))); +void button_1_isr(void) { + // Toggle Red LED + uint8_t level = clic_get_int_level(&clic, (LOCALINTIDBASE + LOCAL_INT_BTN_1)); + printf("Button 1 was pressed, interrupt level %d. Toggle Blue.\n", level); + GPIO_REG(GPIO_OUTPUT_VAL) = GPIO_REG(GPIO_OUTPUT_VAL) ^ (0x1 << BLUE_LED_OFFSET); + wait_ms(5000); + GPIO_REG(GPIO_OUTPUT_VAL) = GPIO_REG(GPIO_OUTPUT_VAL) ^ (0x1 << BLUE_LED_OFFSET); +} + +void button_1_setup(void) { + clic_install_handler(&clic, (LOCALINTIDBASE + LOCAL_INT_BTN_1), button_1_isr); + clic_set_int_level(&clic, (LOCALINTIDBASE + LOCAL_INT_BTN_1), 2); + clic_enable_interrupt(&clic, (LOCALINTIDBASE + LOCAL_INT_BTN_1)); +} + +void button_2_isr(void) __attribute__((interrupt("SiFive-CLIC-preemptible"))); +void button_2_isr(void) { + // Toggle Red LED + uint8_t level = clic_get_int_level(&clic, (LOCALINTIDBASE + LOCAL_INT_BTN_2)); + printf("Button 2 was pressed, interrupt level %d. Pending CSIPID and toggle Green.\n", level); + GPIO_REG(GPIO_OUTPUT_VAL) = GPIO_REG(GPIO_OUTPUT_VAL) ^ (0x1 << GREEN_LED_OFFSET); + //pend a software interrupt + clic_set_pending(&clic, CSIPID); + wait_ms(1000); + GPIO_REG(GPIO_OUTPUT_VAL) = GPIO_REG(GPIO_OUTPUT_VAL) ^ (0x1 << GREEN_LED_OFFSET); +} + +void button_2_setup(void) { + clic_install_handler(&clic, (LOCALINTIDBASE + LOCAL_INT_BTN_2), button_2_isr); + clic_set_int_level(&clic, (LOCALINTIDBASE + LOCAL_INT_BTN_2), 3); + clic_enable_interrupt(&clic, (LOCALINTIDBASE + LOCAL_INT_BTN_2)); +} + +/*Entry Point for Machine Software Interrupt Handler*/ +uint32_t COUNT; +void csip_isr()__attribute((interrupt)); +void csip_isr() { + //clear the SW interrupt + CLIC0_REG8(CLIC_INTIP + CSIPID) = 0; + COUNT++; +} + +void csip_setup(void) { + clic_install_handler(&clic, CSIPID, csip_isr); + clic_set_int_level(&clic, CSIPID, 1); + clic_enable_interrupt(&clic, CSIPID); +} + +void config_gpio() { + // Configure LEDs as outputs. + GPIO_REG(GPIO_INPUT_EN) &= ~((0x1<< RED_LED_OFFSET) | (0x1<< GREEN_LED_OFFSET) | (0x1 << BLUE_LED_OFFSET)) ; + GPIO_REG(GPIO_OUTPUT_EN) |= ((0x1<< RED_LED_OFFSET)| (0x1<< GREEN_LED_OFFSET) | (0x1 << BLUE_LED_OFFSET)) ; + GPIO_REG(GPIO_OUTPUT_VAL) &= ((0x1<< RED_LED_OFFSET) | (0x1<< GREEN_LED_OFFSET)| (0x1 << BLUE_LED_OFFSET)) ; +} + +int main(int argc, char **argv) +{ + clear_csr(mstatus, MSTATUS_MIE); + clear_csr(mie, IRQ_M_SOFT); + clear_csr(mie, IRQ_M_TIMER); + + //initialize clic registers and vector table + clic_init(&clic, CLIC_HART0_ADDR, + (interrupt_function_ptr_t*)localISR, + default_handler, + CLIC_NUM_INTERRUPTS, + CLIC_CONFIG_BITS); + + //use all 4 config bits for levels, no shv + clic_set_cliccfg(&clic, (CLIC_CONFIG_BITS<<1)); + + //initialize gpio and buttons. + //each button registers an interrupt handler + config_gpio(); + button_0_setup(); + button_1_setup(); + button_2_setup(); + csip_setup(); + + // Enable all global interrupts + set_csr(mstatus, MSTATUS_MIE); + print_instructions(); + + while(1) { + wait_ms(10000); + printf("Count=%d\n", COUNT); + //Trigger a SW interrupt + clic_set_pending(&clic, CSIPID); + } + + return 0; + +} |