2 files changed, 224 insertions, 0 deletions
diff --git a/software/local_interrupts/Makefile b/software/local_interrupts/Makefile
new file mode 100644
index 0000000..4605ee9
--- /dev/null
+++ b/software/local_interrupts/Makefile
@@ -0,0 +1,8 @@
+TARGET = local_interrupts
+CFLAGS += -O2 -fno-builtin-printf -DUSE_LOCAL_ISR
+
+BSP_BASE = ../../bsp
+
+C_SRCS += local_interrupts.c
+
+include $(BSP_BASE)/env/common.mk
diff --git a/software/local_interrupts/local_interrupts.c b/software/local_interrupts/local_interrupts.c
new file mode 100644
index 0000000..cb2aca3
--- /dev/null
+++ b/software/local_interrupts/local_interrupts.c
@@ -0,0 +1,216 @@
+// See LICENSE for license details.
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "platform.h"
+#include <string.h>
+#include "encoding.h"
+#include <unistd.h>
+
+#ifndef _SIFIVE_COREPLEXIP_ARTY_H
+#error 'local_interrupts' demo only supported for Coreplex IP Eval Kits
+#endif
+
+// Global Variable used to show
+// software interrupts.
+volatile uint32_t g_debouncing;
+
+void debounce();
+
+// Structures for registering different interrupt handlers
+// for different parts of the application.
+typedef void (*interrupt_function_ptr_t) (void);
+
+// This function enables some of the local interrupts sources
+// used in this demo -- just those for the buttons and
+// Switch 3.
+
+void enable_local_interrupts(){
+
+  // lowest priority
+  set_csr(mie, MIP_MLIP(LOCAL_INT_SW_3 ));
+  set_csr(mie, MIP_MLIP(LOCAL_INT_BTN_0));
+  set_csr(mie, MIP_MLIP(LOCAL_INT_BTN_1));
+  set_csr(mie, MIP_MLIP(LOCAL_INT_BTN_2));
+  set_csr(mie, MIP_MLIP(LOCAL_INT_BTN_3));
+  // highest priority
+  
+}
+
+void disable_local_interrupts() {
+
+  // lowest priority
+  clear_csr(mie, MIP_MLIP(LOCAL_INT_SW_3 ));
+  clear_csr(mie, MIP_MLIP(LOCAL_INT_BTN_0));
+  clear_csr(mie, MIP_MLIP(LOCAL_INT_BTN_1));
+  clear_csr(mie, MIP_MLIP(LOCAL_INT_BTN_2));
+  clear_csr(mie, MIP_MLIP(LOCAL_INT_BTN_3));
+  // highest priority
+
+}
+
+/*Entry Point for Machine Software Interrupt Handler*/
+void msi_isr() {
+
+  const char msi_msg[] = "    Debouncing: (this message due to Software Interrupt))\n\n";
+  write (STDOUT_FILENO, msi_msg, strlen(msi_msg));  
+
+  //clear the  SW interrupt
+  CLINT_REG(CLINT_MSIP) = 0;
+
+}
+
+/*Entry Point for Machine Timer Interrupt Handler*/
+void mti_isr(){
+
+  // Disable the timer interrupt. The Debounce logic sets it.
+  clear_csr(mie, MIP_MTIP);
+
+  // Enable all the local interrupts
+  enable_local_interrupts();
+}
+
+
+const char * instructions_msg = " \
+\n\
+                         SiFive, Inc\n\
+ E31/E51 Coreplex IP Eval Kit 'local_interrupts' demo.\n\
+\n\
+The Buttons 0-3 and Switch 3 are enabled as local\n\
+interrupts sources. A .5 s 'debounce' timer is used \n\
+between these interrupts. Software interrupts are
+used to print a message while debouncing.\n\
+Note the priority of the interrupts sources.\n\
+\n";
+
+void print_instructions() {
+
+  write (STDERR_FILENO, instructions_msg, strlen(instructions_msg));
+
+}
+
+void button_0_isr(void) {
+
+  // Toggle Red LED
+  const char button_0_msg[] = "Button 0 was pressed. Toggle Red.\n";
+  write (STDOUT_FILENO, button_0_msg, strlen(button_0_msg));  
+  GPIO_REG(GPIO_OUTPUT_VAL) = GPIO_REG(GPIO_OUTPUT_VAL) ^ (0x1 << RED_LED_OFFSET);
+  debounce();  
+};
+
+void button_1_isr(void) {
+
+  // Toggle Green LED
+  const char button_1_msg[] = "Button 1 was pressed. Toggle Green.\n";
+  write (STDOUT_FILENO, button_1_msg, strlen(button_1_msg));  
+  GPIO_REG(GPIO_OUTPUT_VAL) = GPIO_REG(GPIO_OUTPUT_VAL) ^ (0x1 << GREEN_LED_OFFSET);
+  debounce();
+};
+
+
+void button_2_isr(void) {
+
+  // Toggle Blue LED
+  const char button_2_msg[] = "Button 2 was pressed. Toggle Blue.\n";
+  write (STDOUT_FILENO, button_2_msg, strlen(button_2_msg));  
+  GPIO_REG(GPIO_OUTPUT_VAL) = GPIO_REG(GPIO_OUTPUT_VAL) ^ (0x1 << BLUE_LED_OFFSET);
+  debounce();
+  
+};
+
+void button_3_isr(void) {
+  const char button_3_msg[] = "Button 3 was pressed! (No LEDs change).\n";
+  write (STDOUT_FILENO, button_3_msg, strlen(button_3_msg));
+  debounce();
+}
+
+void switch_3_isr(void) {
+  const char sw_3_msg[] = "Switch 3 is on! But buttons have higher priority.\n";
+  write (STDOUT_FILENO, sw_3_msg, strlen(sw_3_msg));
+  debounce();
+}
+
+void debounce(int local_interrupt_num) {
+
+  // Disable the most recent interrupt.
+  // Don't enable it again until the timer goes off,
+  // in .5 second.
+  
+  // Set the machine timer to go off in .5 seconds.
+  // If the timer was already set to go off, this "cancels"
+  // the current one.
+  
+  volatile uint64_t * mtime       = (uint64_t*) (CLINT_CTRL_ADDR + CLINT_MTIME);
+  volatile uint64_t * mtimecmp    = (uint64_t*) (CLINT_CTRL_ADDR + CLINT_MTIMECMP);
+  uint64_t now = *mtime;
+  uint64_t then = now + .5*RTC_FREQ;
+  *mtimecmp = then;
+
+  disable_local_interrupts();
+  g_debouncing = 1;
+
+  // Enable the Machine-Timer bit in MIE
+  set_csr(mie, MIP_MTIP);
+  
+}
+
+// See bsp/env/<BOARD>/init.c for how this
+// interrupt vector is used.
+
+interrupt_function_ptr_t localISR[32]; 
+
+int main(int argc, char **argv)
+{
+  
+  // Configure LEDs as outputs.
+  GPIO_REG(GPIO_INPUT_EN)    &= ~((0x1<< RED_LED_OFFSET) | (0x1<< GREEN_LED_OFFSET) | (0x1 << BLUE_LED_OFFSET)) ;
+  GPIO_REG(GPIO_OUTPUT_EN)   |=  ((0x1<< RED_LED_OFFSET)| (0x1<< GREEN_LED_OFFSET) | (0x1 << BLUE_LED_OFFSET)) ;
+  GPIO_REG(GPIO_OUTPUT_VAL)  |=   (0x1 << BLUE_LED_OFFSET) ;
+  GPIO_REG(GPIO_OUTPUT_VAL)  &=  ~((0x1<< RED_LED_OFFSET) | (0x1<< GREEN_LED_OFFSET)) ;
+
+  // The Buttons and Switches which are used as local interrupt sources
+  // do not go through the GPIO peripheral, so they do not need to
+  // be configured as inputs.
+  
+  // Disable the timer & local interrupts until setup is done (they're
+  // not reset by default)
+  
+  // Disable all interrupts. MIE is not reset.
+  write_csr(mie, 0);
+
+  for (int isr = 0; isr < 32; isr++){
+    localISR[isr] = 0;
+  }
+  
+  localISR[IRQ_M_SOFT]  = msi_isr;
+  localISR[IRQ_M_TIMER] = mti_isr;
+  localISR[IRQ_M_LOCAL + LOCAL_INT_SW_3]  = switch_3_isr;
+  localISR[IRQ_M_LOCAL + LOCAL_INT_BTN_0] = button_0_isr;
+  localISR[IRQ_M_LOCAL + LOCAL_INT_BTN_1] = button_1_isr;
+  localISR[IRQ_M_LOCAL + LOCAL_INT_BTN_2] = button_2_isr;
+  localISR[IRQ_M_LOCAL + LOCAL_INT_BTN_3] = button_3_isr;
+
+  print_instructions();
+  
+  enable_local_interrupts();
+
+  g_debouncing = 0;
+
+  // Enable SW interrupts as well in this demo.
+  set_csr(mie, MIP_MSIP);
+  
+  // Enable all global interrupts
+  set_csr(mstatus, MSTATUS_MIE);
+
+  volatile int foo = 1;
+  while(foo){
+    if (g_debouncing){
+      //Trigger a SW interrupt
+      CLINT_REG(CLINT_MSIP) = 1;
+      g_debouncing = 0;
+    }
+  }
+
+  return 0;
+
+}