From 2f2ddaecf1926091061bb177914b0afc652e713d Mon Sep 17 00:00:00 2001 From: Nathaniel Graff Date: Tue, 15 Jan 2019 10:43:58 -0800 Subject: Add clarifications to README - Note that the repository is under construction - Explain what Freedom Metal is - Clarify what the arguments to `make` mean - Explicitly list which examples are for which BSP Signed-off-by: Nathaniel Graff --- README.md | 200 +++++++++++++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 160 insertions(+), 40 deletions(-) diff --git a/README.md b/README.md index ae2384f..f900277 100644 --- a/README.md +++ b/README.md @@ -1,21 +1,80 @@ # SiFive Freedom E SDK README # This repository, maintained by SiFive Inc, makes it easy to get started developing -software for the Freedom E and Freedom S Embedded RISC-V Platforms. +software for the Freedom E and Freedom S Embedded RISC-V Platforms. This SDK +is intended to work on any target supported by SiFive's distributions of the +RISC-V GNU Toolchain. + +### Under Construction ### + +This repository is currently under construction as we transition from the +legacy Freedom E SDK API to the new Freedom Metal Compatibility Library. + +#### What is Freedom Metal? ### + +[Freedom Metal](https://github.com/sifive/freedom-metal) ([Documentation](https://github.com/sifive/freedom-metal/blob/master/doc/mee-spec.md)) +is a library developed by SiFive for writing portable software for all of SiFive's +RISC-V IP, RISC-V FPGA evaluation images, and development boards. Programs written +against the Freedom Metal API are intended to build and run for all SiFive RISC-V +targets. This makes Freedom Metal suitable for writing portable tests, bare metal +application programming, and as a hardware abstraction layer for porting +operating systems to RISC-V. + +Consumers of E SDK should also be aware that as we make this transition, +we are still making refinements to the API provided by Freedom Metal. As such, +**the Freedom Metal API should be considered in beta** until we tag a stable release +of Freedom E SDK. ### Contents ### #### Freedom Metal Compatibility Library #### -* Board Support Packages for - - SiFive HiFive 1 (sifive-hifive1) - - SiFive Freedom E310 Arty (freedom-e310-arty) - - SiFive CoreIP (e.g. coreip-e31) - - SiFive CoreIP Arty FPGA Evaluation targets (e.g. coreip-e31-arty) -* A Few Example Programs - - Example programs targeting the Freedom Metal compatibility library can be identified - as submodules within the software/ directory, rather than being maintained in-tree - like the legacy examples are. +* Board Support Packages (found under `bsp/`) + - Supported Targets: + - [SiFive HiFive 1](https://www.sifive.com/boards/hifive1) + - sifive-hifive1 + - [SiFive Freedom E310 Arty](https://github.com/sifive/freedom) + - freedom-e310-arty + - SiFive CoreIP + - coreip-e31 + - coreip-s51 + - SiFive CoreIP Arty FPGA Evaluation targets + - coreip-e31-arty + - coreip-s51-arty + - The board support files for the Freedom Metal library are located entirely + within a single target directory in `bsp//`. For example, the HiFive 1 + board support files for Freedom Metal are entirely within `bsp/sifive-hifive1/` + and consist of the following: + * design.dts + - The DeviceTree description of the target. This file is used to parameterize + the Freedom Metal library to the target device. It is included as reference + so that users of Freedom Metal are aware of what features and peripherals + are available on the target. + * mee.h + - The Freedom Metal machine header which is used internally to Freedom Metal + to instantiate structures to support the target device. + * mee.lds + - The linker script for the target device. + * openocd.cfg (for development board and FPGA targets) + - Used to configure OpenOCD for flashing and debugging the target device. + * settings.mk + - Used to set `-march` and `-mabi` arguments to the RISC-V GNU Toolchain. +* A Few Example Programs (found under `software/`) + - hello + - Prints "Hello, World!" to stdout, if a serial device is present on the target. + - return-pass + - Returns status code 0 indicating program success. + - return-fail + - Returns status code 1 indicating program failure. + - example-itim + - Demonstrates how to statically link application code into the Instruction + Tightly Integrated Memory (ITIM) if an ITIM is present on the target. + - software-interrupt + - Demonstrates how to register a handler for and trigger a software interrupt + - timer-interrupt + - Demonstrates how to register a handler for and trigger a timer interrupt + - local-interrupt + - Demonstrates how to register a handler for and trigger a local interrupt #### (Deprecated) Legacy Freedom E SDK Library #### @@ -23,41 +82,60 @@ As we transition to supporting SiFive targets and examples with the new Freedom compatibility library, the legacy Freedom E SDK libraries and examples are still available within this repository. -* Board Support Packages for - - SiFive HiFive 1 (freedom-e300-hifive1) - - SiFive Freedom E310 Arty (freedom-e300-arty) - - SiFive CoreIP Arty FPGA Evaluation Targets (e.g. coreplexip-e31-arty) - - Additional legacy targets are contained within the bsp/env/ directory. +As we port legacy example programs to the new Freedom Metal API, we will remove +the legacy version of the examples from this repository. + +* Board Support Packages (found under `bsp/env`) + - Supported Targets: + - SiFive HiFive 1 + - freedom-e300-hifive1 + - SiFive Freedom E310 Arty + - freedom-e300-arty + - SiFive CoreIP Arty FPGA Evaluation Targets (e.g. coreplexip-e31-arty) + - coreip-e2-arty + - coreplexip-e31-arty + - coreplexip-e51-arty + - The Legacy board support files are located as follows: + * `bsp/env/` + - Holds board-specific files for the Legacy API + * `bsp/drivers/` + - Holds legacy device drivers for the PLIC, CLIC, and PRCI + * `bsp/include` + - Holds legacy header files for the Legacy API + * `bsp/libwrap` + - Holds wrappers around libc for the Legacy API * A Few Example Programs - - Example programs targeting the legacy Freedom E SDK can be identified as being tracked - within this repository in the software/ directory, rathre than being maintained - out-of-tree like the Freedom Metal examples are. + - asm\_main + - clic\_vectored + - coremark + - coreplexip\_welcome + - demo\_gpio + - dhrystone + - double\_tap\_dontboot + - global\_interrupts + - i2c\_demo + - led\_fade + - local\_interrupts + - performance\_counters + - smp + - vectored\_interrupts + - watchdog Legacy examples can be built using the same commands as the Freedom Metal examples and simply omitting the `BSP=mee` argument or substituting it with `BSP=legacy`. ### Setting up the SDK ### -First, clone this repository: +#### Prerequisites #### -``` -git clone --recursive https://github.com/sifive/freedom-e-sdk.git -``` +To use this SDK, you will need the following software available on your machine: -If at first you omit the `--recursive` option, you can update submodules using the command: +* GNU Make +* Git +* RISC-V GNU Toolchain +* RISC-V OpenOCD (for use with development board and FPGA targets) -``` -git submodule update --init --recursive -``` - -To see Makefile options: - -``` -cd freedom-e-sdk -make help -``` - -#### Install the RISC-V Toolchain #### +##### Install the RISC-V Toolchain and OpenOCD ##### The RISC-V GNU Toolchain and OpenOCD are available from the SiFive Website at @@ -77,45 +155,83 @@ export RISCV_OPENOCD_PATH=/my/desired/location/openocd export RISCV_PATH=/my/desired/location/riscv64-unknown-elf-gcc-- ``` +#### Cloning the Repository #### + +This repository can be cloned by running the following commands: + +``` +git clone --recursive https://github.com/sifive/freedom-e-sdk.git +cd freedom-e-sdk +``` + +The `--recursive` option is required to clone the git submodules included in the +repository. If at first you omit the `--recursive` option, you can achieve +the same effect by updating submodules using the command: + +``` +git submodule update --init --recursive +``` + ### Updating your SDK ### If you'd like to update your SDK to the latest version: ``` -cd freedom-e-sdk git pull origin master git submodule update --init --recursive ``` ### Using the Tools ### +To ease the transition for consumers of the Legacy SDK, we've namespaced +the new Freedom Metal examples behind the environment variable `BSP`. To use the +Freedom Metal examples, you may `export BSP=mee` in your shell environment, or simply +pass `BSP=mee` as an argument to your `make` invocations as you see in the following +example commands. + #### Building an Example #### To compile a bare-metal RISC-V program: ``` -cd freedom-e-sdk make BSP=mee [PROGRAM=hello] [BOARD=sifive-hifive1] software ``` +The square brackets in the above command indicate optional parameters for the +Make invocation. As you can see, the default values of these parameters tell +the build script to build the `hello` example for the `sifive-hifive1` target. +If, for example, you wished to build the `timer-interrupt` example for the S51 +Arty FPGA Evaluation target, you would instead run the command + +``` +make BSP=mee PROGRAM=timer-interrupt BOARD=coreip-s51-arty software +``` + +#### Building a Legacy Example #### + +The legacy examples can still be built by omitting `BSP=mee` or by substituting +`BSP=legacy`. For example, to build the legacy `demo_gpio` application for +HiFive 1, run: + +``` +make PROGRAM=demo_gpio BOARD=freedom-e300-hifive1 software +``` + #### Uploading to the Target Board #### ``` -cd freedom-e-sdk make BSP=mee [PROGRAM=hello] [BOARD=sifive-hifive1] upload ``` #### Debugging a Target Program #### ``` -cd freedom-e-sdk make BSP=mee [PROGRAM=hello] [BOARD=sifive-hifive1] debug ``` #### Cleaning a Target Program Build Directory #### ``` -cd freedom-e-sdk make BSP=mee [PROGRAM=hello] [BOARD=sifive-hifive1] clean ``` @@ -123,6 +239,10 @@ Run `make help` for more commands. ### Benchmarking ### +The Dhrystone and CoreMark benchmarks are still only supported by the Legacy +Freedom E SDK. When we port the benchmarks to Freedom Metal, we will update +this section to describe the updated build steps. + #### Dhrystone #### After setting up the software and debug toolchains, you can build and -- cgit v1.2.3