From c4d5e78b7030c12a8ae6f182ad7b25104bb666e8 Mon Sep 17 00:00:00 2001 From: Kevin Mills Date: Sun, 20 Jan 2019 10:19:45 -0800 Subject: Remove unused/legacy FreedomStudio examples --- .../dhrystone/sifive-freedom-e300-hifive1.cfg | 34 ---------------------- 1 file changed, 34 deletions(-) delete mode 100644 FreedomStudio/HiFive1/dhrystone/sifive-freedom-e300-hifive1.cfg (limited to 'FreedomStudio/HiFive1/dhrystone/sifive-freedom-e300-hifive1.cfg') diff --git a/FreedomStudio/HiFive1/dhrystone/sifive-freedom-e300-hifive1.cfg b/FreedomStudio/HiFive1/dhrystone/sifive-freedom-e300-hifive1.cfg deleted file mode 100644 index b0a8e26..0000000 --- a/FreedomStudio/HiFive1/dhrystone/sifive-freedom-e300-hifive1.cfg +++ /dev/null @@ -1,34 +0,0 @@ -adapter_khz 10000 - -interface ftdi -ftdi_device_desc "Dual RS232-HS" -ftdi_vid_pid 0x0403 0x6010 - -ftdi_layout_init 0x0008 0x001b -ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020 - -#Reset Stretcher logic on FE310 is ~1 second long -#This doesn't apply if you use -# ftdi_set_signal, but still good to document -#adapter_nsrst_delay 1500 - -set _CHIPNAME riscv -jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913 - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME riscv -chain-position $_TARGETNAME -$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1 - -flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME -init -#reset -- This type of reset is not implemented yet -if {[ info exists pulse_srst]} { - ftdi_set_signal nSRST 0 - ftdi_set_signal nSRST z - #Wait for the reset stretcher - #It will work without this, but - #will incur lots of delays for later commands. - sleep 1500 -} -halt -flash protect 0 64 last off -- cgit v1.2.1-18-gbd029