From f695df295da82c8ef801906ad8b00b0e8afa7502 Mon Sep 17 00:00:00 2001 From: Nathaniel Graff Date: Thu, 7 Mar 2019 09:27:31 -0800 Subject: Remove legacy BSP Signed-off-by: Nathaniel Graff --- bsp/drivers/clic/clic_driver.c | 163 -------------------- bsp/drivers/clic/clic_driver.h | 44 ------ bsp/drivers/fe300prci/fe300prci_driver.c | 252 ------------------------------- bsp/drivers/fe300prci/fe300prci_driver.h | 79 ---------- bsp/drivers/plic/plic_driver.c | 127 ---------------- bsp/drivers/plic/plic_driver.h | 51 ------- 6 files changed, 716 deletions(-) delete mode 100644 bsp/drivers/clic/clic_driver.c delete mode 100644 bsp/drivers/clic/clic_driver.h delete mode 100644 bsp/drivers/fe300prci/fe300prci_driver.c delete mode 100644 bsp/drivers/fe300prci/fe300prci_driver.h delete mode 100644 bsp/drivers/plic/plic_driver.c delete mode 100644 bsp/drivers/plic/plic_driver.h (limited to 'bsp/drivers') diff --git a/bsp/drivers/clic/clic_driver.c b/bsp/drivers/clic/clic_driver.c deleted file mode 100644 index 136ccee..0000000 --- a/bsp/drivers/clic/clic_driver.c +++ /dev/null @@ -1,163 +0,0 @@ -// See LICENSE for license details. - -#include "sifive/devices/clic.h" -#include "clic/clic_driver.h" -#include "platform.h" -#include "encoding.h" -#include - - -void volatile_memzero(uint8_t * base, unsigned int size) { - volatile uint8_t * ptr; - for (ptr = base; ptr < (base + size); ptr++){ - *ptr = 0; - } -} - -// Note that there are no assertions or bounds checking on these -// parameter values. -void clic_init ( - clic_instance_t * this_clic, - uintptr_t hart_addr, - interrupt_function_ptr_t* vect_table, - interrupt_function_ptr_t default_handler, - uint32_t num_irq, - uint32_t num_config_bits - ) -{ - this_clic->hart_addr= hart_addr; - this_clic->vect_table= vect_table; - this_clic->num_config_bits= num_config_bits; - - //initialize vector table - for(int i=0;ivect_table[i] = default_handler; - } - - //set base vectors - write_csr(mtvt, vect_table); - - - //clear all interrupt enables and pending - volatile_memzero((uint8_t*)(this_clic->hart_addr+CLIC_INTIE), num_irq); - volatile_memzero((uint8_t*)(this_clic->hart_addr+CLIC_INTIP), num_irq); - - //clear nlbits and nvbits; all interrupts trap to level 15 - *(volatile uint8_t*)(this_clic->hart_addr+CLIC_CFG)=0; - -} - -void clic_install_handler (clic_instance_t * this_clic, uint32_t source, interrupt_function_ptr_t handler) { - this_clic->vect_table[source] = handler; -} - -void clic_enable_interrupt (clic_instance_t * this_clic, uint32_t source) { - *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTIE+source) = 1; -} - -void clic_disable_interrupt (clic_instance_t * this_clic, uint32_t source){ - *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTIE+source) = 0; -} - -void clic_set_pending(clic_instance_t * this_clic, uint32_t source){ - *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTIP+source) = 1; -} - -void clic_clear_pending(clic_instance_t * this_clic, uint32_t source){ - *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTIP+source) = 0; -} - -void clic_set_intcfg (clic_instance_t * this_clic, uint32_t source, uint32_t intcfg){ - *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTCFG+source) = intcfg; -} - -uint8_t clic_get_intcfg (clic_instance_t * this_clic, uint32_t source){ - return *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTCFG+source); -} - -void clic_set_cliccfg (clic_instance_t * this_clic, uint32_t cfg){ - *(volatile uint8_t*)(this_clic->hart_addr+CLIC_CFG) = cfg; -} - -uint8_t clic_get_cliccfg (clic_instance_t * this_clic){ - return *(volatile uint8_t*)(this_clic->hart_addr+CLIC_CFG); -} - -//sets an interrupt level based encoding of nmbits, nlbits -uint8_t clic_set_int_level( clic_instance_t * this_clic, uint32_t source, uint8_t level) { - //extract nlbits - uint8_t nlbits = clic_get_cliccfg(this_clic); - nlbits = (nlbits >>1) & 0x7; - - //shift level right to mask off unused bits - level = level>>((this_clic->num_config_bits)-nlbits); //plus this_clic->nmbits which is always 0 for now. - //shift level into correct bit position - level = level << (8-this_clic->num_config_bits) + (this_clic->num_config_bits - nlbits); - - //write to clicintcfg - uint8_t current_intcfg = clic_get_intcfg(this_clic, source); - clic_set_intcfg(this_clic, source, (current_intcfg | level)); - - return level; -} - -//gets an interrupt level based encoding of nmbits, nlbits -uint8_t clic_get_int_level( clic_instance_t * this_clic, uint32_t source) { - uint8_t level; - level = clic_get_intcfg(this_clic, source); - - //extract nlbits - uint8_t nlbits = clic_get_cliccfg(this_clic); - nlbits = (nlbits >>1) & 0x7; - - //shift level - level = level >> (8-(this_clic->num_config_bits)); - - //shift level right to mask off priority bits - level = level>>(this_clic->num_config_bits-nlbits); //this_clic->nmbits which is always 0 for now. - - return level; -} - -//sets an interrupt priority based encoding of nmbits, nlbits -uint8_t clic_set_int_priority( clic_instance_t * this_clic, uint32_t source, uint8_t priority) { - //priority bits = num_config_bits - nlbits - //extract nlbits - uint8_t nlbits = clic_get_cliccfg(this_clic); - nlbits = (nlbits >>1) & 0x7; - - uint8_t priority_bits = this_clic->num_config_bits-nlbits; - if(priority_bits = 0) { - //no bits to set - return 0; - } - //mask off unused bits - priority = priority >> (8-priority_bits); - //shift into the correct bit position - priority = priority << (8-(this_clic->num_config_bits)); - - //write to clicintcfg - uint8_t current_intcfg = clic_get_intcfg(this_clic, source); - clic_set_intcfg(this_clic, source, (current_intcfg | priority)); - return current_intcfg; -} - -//gets an interrupt priority based encoding of nmbits, nlbits -uint8_t clic_get_int_priority( clic_instance_t * this_clic, uint32_t source) { - uint8_t priority; - priority = clic_get_intcfg(this_clic, source); - - //extract nlbits - uint8_t nlbits = clic_get_cliccfg(this_clic); - nlbits = (nlbits >>1) & 0x7; - - //shift left to mask off level bits - priority = priority << nlbits; - - //shift priority - priority = priority >> (8-((this_clic->num_config_bits)+nlbits)); - - return priority; -} - - diff --git a/bsp/drivers/clic/clic_driver.h b/bsp/drivers/clic/clic_driver.h deleted file mode 100644 index 27c34c2..0000000 --- a/bsp/drivers/clic/clic_driver.h +++ /dev/null @@ -1,44 +0,0 @@ -// See LICENSE file for licence details - -#ifndef PLIC_DRIVER_H -#define PLIC_DRIVER_H - - -__BEGIN_DECLS - -#include "platform.h" - -typedef void (*interrupt_function_ptr_t) (void); - -typedef struct __clic_instance_t -{ - uintptr_t hart_addr; - interrupt_function_ptr_t* vect_table; - uint32_t num_config_bits; - uint32_t num_sources; -} clic_instance_t; - -// Note that there are no assertions or bounds checking on these -// parameter values. -void clic_init (clic_instance_t * this_clic, uintptr_t hart_addr, interrupt_function_ptr_t* vect_table, interrupt_function_ptr_t default_handler, uint32_t num_irq,uint32_t num_config_bits); -void clic_install_handler (clic_instance_t * this_clic, uint32_t source, interrupt_function_ptr_t handler); -void clic_enable_interrupt (clic_instance_t * this_clic, uint32_t source); -void clic_disable_interrupt (clic_instance_t * this_clic, uint32_t source); -void clic_set_pending(clic_instance_t * this_clic, uint32_t source); -void clic_clear_pending(clic_instance_t * this_clic, uint32_t source); -void clic_set_intcfg (clic_instance_t * this_clic, uint32_t source, uint32_t intcfg); -uint8_t clic_get_intcfg (clic_instance_t * this_clic, uint32_t source); -void clic_set_cliccfg (clic_instance_t * this_clic, uint32_t cfg); -uint8_t clic_get_cliccfg (clic_instance_t * this_clic); -//sets an interrupt level based encoding of nmbits, nlbits -uint8_t clic_set_int_level( clic_instance_t * this_clic, uint32_t source, uint8_t level); -//get an interrupt level based encoding of nmbits, nlbits -uint8_t clic_get_int_level( clic_instance_t * this_clic, uint32_t source); -//sets an interrupt priority based encoding of nmbits, nlbits -uint8_t clic_set_int_priority( clic_instance_t * this_clic, uint32_t source, uint8_t priority); -//sets an interrupt priority based encoding of nmbits, nlbits -uint8_t clic_get_int_priority( clic_instance_t * this_clic, uint32_t source); - -__END_DECLS - -#endif diff --git a/bsp/drivers/fe300prci/fe300prci_driver.c b/bsp/drivers/fe300prci/fe300prci_driver.c deleted file mode 100644 index 8eeaafc..0000000 --- a/bsp/drivers/fe300prci/fe300prci_driver.c +++ /dev/null @@ -1,252 +0,0 @@ -// See LICENSE file for license details - -#include "platform.h" - -#ifdef PRCI_CTRL_ADDR -#include "fe300prci/fe300prci_driver.h" -#include - -#define rdmcycle(x) { \ - uint32_t lo, hi, hi2; \ - __asm__ __volatile__ ("1:\n\t" \ - "csrr %0, mcycleh\n\t" \ - "csrr %1, mcycle\n\t" \ - "csrr %2, mcycleh\n\t" \ - "bne %0, %2, 1b\n\t" \ - : "=r" (hi), "=r" (lo), "=r" (hi2)) ; \ - *(x) = lo | ((uint64_t) hi << 32); \ - } - -uint32_t PRCI_measure_mcycle_freq(uint32_t mtime_ticks, uint32_t mtime_freq) -{ - - uint32_t start_mtime = CLINT_REG(CLINT_MTIME); - uint32_t end_mtime = start_mtime + mtime_ticks + 1; - - // Make sure we won't get rollover. - while (end_mtime < start_mtime){ - start_mtime = CLINT_REG(CLINT_MTIME); - end_mtime = start_mtime + mtime_ticks + 1; - } - - // Don't start measuring until mtime edge. - uint32_t tmp = start_mtime; - do { - start_mtime = CLINT_REG(CLINT_MTIME); - } while (start_mtime == tmp); - - uint64_t start_mcycle; - rdmcycle(&start_mcycle); - - while (CLINT_REG(CLINT_MTIME) < end_mtime) ; - - uint64_t end_mcycle; - rdmcycle(&end_mcycle); - uint32_t difference = (uint32_t) (end_mcycle - start_mcycle); - - uint64_t freq = ((uint64_t) difference * mtime_freq) / mtime_ticks; - return (uint32_t) freq & 0xFFFFFFFF; - -} - - -void PRCI_use_hfrosc(int div, int trim) -{ - // Make sure the HFROSC is running at its default setting - // It is OK to change this even if we are running off of it. - - PRCI_REG(PRCI_HFROSCCFG) = (ROSC_DIV(div) | ROSC_TRIM(trim) | ROSC_EN(1)); - - while ((PRCI_REG(PRCI_HFROSCCFG) & ROSC_RDY(1)) == 0); - - PRCI_REG(PRCI_PLLCFG) &= ~PLL_SEL(1); -} - -void PRCI_use_pll(int refsel, int bypass, - int r, int f, int q, int finaldiv, - int hfroscdiv, int hfrosctrim) -{ - // Ensure that we aren't running off the PLL before we mess with it. - if (PRCI_REG(PRCI_PLLCFG) & PLL_SEL(1)) { - // Make sure the HFROSC is running at its default setting - PRCI_use_hfrosc(4, 16); - } - - // Set PLL Source to be HFXOSC if desired. - uint32_t config_value = 0; - - config_value |= PLL_REFSEL(refsel); - - if (bypass) { - // Bypass - config_value |= PLL_BYPASS(1); - - PRCI_REG(PRCI_PLLCFG) = config_value; - - // If we don't have an HFXTAL, this doesn't really matter. - // Set our Final output divide to divide-by-1: - PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0)); - } else { - - // To overclock, use the hfrosc - if (hfrosctrim >= 0 && hfroscdiv >= 0) { - PRCI_use_hfrosc(hfroscdiv, hfrosctrim); - } - - // Set DIV Settings for PLL - - // (Legal values of f_REF are 6-48MHz) - - // Set DIVR to divide-by-2 to get 8MHz frequency - // (legal values of f_R are 6-12 MHz) - - config_value |= PLL_BYPASS(1); - config_value |= PLL_R(r); - - // Set DIVF to get 512Mhz frequncy - // There is an implied multiply-by-2, 16Mhz. - // So need to write 32-1 - // (legal values of f_F are 384-768 MHz) - config_value |= PLL_F(f); - - // Set DIVQ to divide-by-2 to get 256 MHz frequency - // (legal values of f_Q are 50-400Mhz) - config_value |= PLL_Q(q); - - // Set our Final output divide to divide-by-1: - if (finaldiv == 1){ - PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0)); - } else { - PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV(finaldiv-1)); - } - - PRCI_REG(PRCI_PLLCFG) = config_value; - - // Un-Bypass the PLL. - PRCI_REG(PRCI_PLLCFG) &= ~PLL_BYPASS(1); - - // Wait for PLL Lock - // Note that the Lock signal can be glitchy. - // Need to wait 100 us - // RTC is running at 32kHz. - // So wait 4 ticks of RTC. - uint32_t now = CLINT_REG(CLINT_MTIME); - while (CLINT_REG(CLINT_MTIME) - now < 4) ; - - // Now it is safe to check for PLL Lock - while ((PRCI_REG(PRCI_PLLCFG) & PLL_LOCK(1)) == 0); - - } - - // Switch over to PLL Clock source - PRCI_REG(PRCI_PLLCFG) |= PLL_SEL(1); - - // If we're running off HFXOSC, turn off the HFROSC to - // save power. - if (refsel) { - PRCI_REG(PRCI_HFROSCCFG) &= ~ROSC_EN(1); - } - -} - -void PRCI_use_default_clocks() -{ - // Turn off the LFROSC - AON_REG(AON_LFROSC) &= ~ROSC_EN(1); - - // Use HFROSC - PRCI_use_hfrosc(4, 16); -} - -void PRCI_use_hfxosc(uint32_t finaldiv) -{ - - PRCI_use_pll(1, // Use HFXTAL - 1, // Bypass = 1 - 0, // PLL settings don't matter - 0, // PLL settings don't matter - 0, // PLL settings don't matter - finaldiv, - -1, - -1); -} - -// This is a generic function, which -// doesn't span the entire range of HFROSC settings. -// It only adjusts the trim, which can span a hundred MHz or so. -// This function does not check the legality of the PLL settings -// at all, and it is quite possible to configure invalid PLL settings -// this way. -// It returns the actual measured CPU frequency. - -uint32_t PRCI_set_hfrosctrim_for_f_cpu(uint32_t f_cpu, PRCI_freq_target target ) -{ - - uint32_t hfrosctrim = 0; - uint32_t hfroscdiv = 4; - uint32_t prev_trim = 0; - - // In this function we use PLL settings which - // will give us a 32x multiplier from the output - // of the HFROSC source to the output of the - // PLL. We first measure our HFROSC to get the - // right trim, then finally use it as the PLL source. - // We should really check here that the f_cpu - // requested is something in the limit of the PLL. For - // now that is up to the user. - - // This will undershoot for frequencies not divisible by 16. - uint32_t desired_hfrosc_freq = (f_cpu/ 16); - - PRCI_use_hfrosc(hfroscdiv, hfrosctrim); - - // Ignore the first run (for icache reasons) - uint32_t cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ); - - cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ); - uint32_t prev_freq = cpu_freq; - - while ((cpu_freq < desired_hfrosc_freq) && (hfrosctrim < 0x1F)){ - prev_trim = hfrosctrim; - prev_freq = cpu_freq; - hfrosctrim ++; - PRCI_use_hfrosc(hfroscdiv, hfrosctrim); - cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ); - } - - // We couldn't go low enough - if (prev_freq > desired_hfrosc_freq){ - PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim); - cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ); - return cpu_freq; - } - - // We couldn't go high enough - if (cpu_freq < desired_hfrosc_freq){ - PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim); - cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ); - return cpu_freq; - } - - // Check for over/undershoot - switch(target) { - case(PRCI_FREQ_CLOSEST): - if ((desired_hfrosc_freq - prev_freq) < (cpu_freq - desired_hfrosc_freq)) { - PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim); - } else { - PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, hfrosctrim); - } - break; - case(PRCI_FREQ_UNDERSHOOT): - PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim); - break; - default: - PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, hfrosctrim); - } - - cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ); - return cpu_freq; - -} - -#endif diff --git a/bsp/drivers/fe300prci/fe300prci_driver.h b/bsp/drivers/fe300prci/fe300prci_driver.h deleted file mode 100644 index 7100f46..0000000 --- a/bsp/drivers/fe300prci/fe300prci_driver.h +++ /dev/null @@ -1,79 +0,0 @@ -// See LICENSE file for license details - -#ifndef _FE300PRCI_DRIVER_H_ -#define _FE300PRCI_DRIVER_H_ - -__BEGIN_DECLS - -#include - -typedef enum prci_freq_target { - - PRCI_FREQ_OVERSHOOT, - PRCI_FREQ_CLOSEST, - PRCI_FREQ_UNDERSHOOT - -} PRCI_freq_target; - -/* Measure and return the approximate frequency of the - * CPU, as given by measuring the mcycle counter against - * the mtime ticks. - */ -uint32_t PRCI_measure_mcycle_freq(uint32_t mtime_ticks, uint32_t mtime_freq); - -/* Safely switch over to the HFROSC using the given div - * and trim settings. - */ -void PRCI_use_hfrosc(int div, int trim); - -/* Safely switch over to the 16MHz HFXOSC, - * applying the finaldiv clock divider (1 is the lowest - * legal value). - */ -void PRCI_use_hfxosc(uint32_t finaldiv); - -/* Safely switch over to the PLL using the given - * settings. - * - * Note that not all combinations of the inputs are actually - * legal, and this function does not check for their - * legality ("safely" means that this function won't turn off - * or glitch the clock the CPU is actually running off, but - * doesn't protect against you making it too fast or slow.) - */ - -void PRCI_use_pll(int refsel, int bypass, - int r, int f, int q, int finaldiv, - int hfroscdiv, int hfrosctrim); - -/* Use the default clocks configured at reset. - * This is ~16Mhz HFROSC and turns off the LFROSC - * (on the current FE310 Dev Platforms, an external LFROSC is - * used as it is more power efficient). - */ -void PRCI_use_default_clocks(); - -/* This routine will adjust the HFROSC trim - * while using HFROSC as the clock source, - * measure the resulting frequency, then - * use it as the PLL clock source, - * in an attempt to get over, under, or close to the - * requested frequency. It returns the actual measured - * frequency. - * - * Note that the requested frequency must be within the - * range supported by the PLL so not all values are - * achievable with this function, and not all - * are guaranteed to actually work. The PLL - * is rated higher than the hardware. - * - * There is no check on the desired f_cpu frequency, it - * is up to the user to specify something reasonable. - */ - -uint32_t PRCI_set_hfrosctrim_for_f_cpu(uint32_t f_cpu, PRCI_freq_target target); - -__END_DECLS - -#endif - diff --git a/bsp/drivers/plic/plic_driver.c b/bsp/drivers/plic/plic_driver.c deleted file mode 100644 index b27d7a5..0000000 --- a/bsp/drivers/plic/plic_driver.c +++ /dev/null @@ -1,127 +0,0 @@ -// See LICENSE for license details. - -#include "sifive/devices/plic.h" -#include "plic/plic_driver.h" -#include "platform.h" -#include "encoding.h" -#include - - -// Note that there are no assertions or bounds checking on these -// parameter values. - -void volatile_memzero(uint8_t * base, unsigned int size) -{ - volatile uint8_t * ptr; - for (ptr = base; ptr < (base + size); ptr++){ - *ptr = 0; - } -} - -void PLIC_init ( - plic_instance_t * this_plic, - uintptr_t base_addr, - uint32_t num_sources, - uint32_t num_priorities - ) -{ - - this_plic->base_addr = base_addr; - this_plic->num_sources = num_sources; - this_plic->num_priorities = num_priorities; - - // Disable all interrupts (don't assume that these registers are reset). - unsigned long hart_id = read_csr(mhartid); - volatile_memzero((uint8_t*) (this_plic->base_addr + - PLIC_ENABLE_OFFSET + - (hart_id << PLIC_ENABLE_SHIFT_PER_TARGET)), - (num_sources + 8) / 8); - - // Set all priorities to 0 (equal priority -- don't assume that these are reset). - volatile_memzero ((uint8_t *)(this_plic->base_addr + - PLIC_PRIORITY_OFFSET), - (num_sources + 1) << PLIC_PRIORITY_SHIFT_PER_SOURCE); - - // Set the threshold to 0. - volatile plic_threshold* threshold = (plic_threshold*) - (this_plic->base_addr + - PLIC_THRESHOLD_OFFSET + - (hart_id << PLIC_THRESHOLD_SHIFT_PER_TARGET)); - - *threshold = 0; - -} - -void PLIC_set_threshold (plic_instance_t * this_plic, - plic_threshold threshold){ - - unsigned long hart_id = read_csr(mhartid); - volatile plic_threshold* threshold_ptr = (plic_threshold*) (this_plic->base_addr + - PLIC_THRESHOLD_OFFSET + - (hart_id << PLIC_THRESHOLD_SHIFT_PER_TARGET)); - - *threshold_ptr = threshold; - -} - - -void PLIC_enable_interrupt (plic_instance_t * this_plic, plic_source source){ - - unsigned long hart_id = read_csr(mhartid); - volatile uint8_t * current_ptr = (volatile uint8_t *)(this_plic->base_addr + - PLIC_ENABLE_OFFSET + - (hart_id << PLIC_ENABLE_SHIFT_PER_TARGET) + - (source >> 3)); - uint8_t current = *current_ptr; - current = current | ( 1 << (source & 0x7)); - *current_ptr = current; - -} - -void PLIC_disable_interrupt (plic_instance_t * this_plic, plic_source source){ - - unsigned long hart_id = read_csr(mhartid); - volatile uint8_t * current_ptr = (volatile uint8_t *) (this_plic->base_addr + - PLIC_ENABLE_OFFSET + - (hart_id << PLIC_ENABLE_SHIFT_PER_TARGET) + - (source >> 3)); - uint8_t current = *current_ptr; - current = current & ~(( 1 << (source & 0x7))); - *current_ptr = current; - -} - -void PLIC_set_priority (plic_instance_t * this_plic, plic_source source, plic_priority priority){ - - if (this_plic->num_priorities > 0) { - volatile plic_priority * priority_ptr = (volatile plic_priority *) - (this_plic->base_addr + - PLIC_PRIORITY_OFFSET + - (source << PLIC_PRIORITY_SHIFT_PER_SOURCE)); - *priority_ptr = priority; - } -} - -plic_source PLIC_claim_interrupt(plic_instance_t * this_plic){ - - unsigned long hart_id = read_csr(mhartid); - - volatile plic_source * claim_addr = (volatile plic_source * ) - (this_plic->base_addr + - PLIC_CLAIM_OFFSET + - (hart_id << PLIC_CLAIM_SHIFT_PER_TARGET)); - - return *claim_addr; - -} - -void PLIC_complete_interrupt(plic_instance_t * this_plic, plic_source source){ - - unsigned long hart_id = read_csr(mhartid); - volatile plic_source * claim_addr = (volatile plic_source *) (this_plic->base_addr + - PLIC_CLAIM_OFFSET + - (hart_id << PLIC_CLAIM_SHIFT_PER_TARGET)); - *claim_addr = source; - -} - diff --git a/bsp/drivers/plic/plic_driver.h b/bsp/drivers/plic/plic_driver.h deleted file mode 100644 index e7d609b..0000000 --- a/bsp/drivers/plic/plic_driver.h +++ /dev/null @@ -1,51 +0,0 @@ -// See LICENSE file for licence details - -#ifndef PLIC_DRIVER_H -#define PLIC_DRIVER_H - - -__BEGIN_DECLS - -#include "platform.h" - -typedef struct __plic_instance_t -{ - uintptr_t base_addr; - - uint32_t num_sources; - uint32_t num_priorities; - -} plic_instance_t; - -typedef uint32_t plic_source; -typedef uint32_t plic_priority; -typedef uint32_t plic_threshold; - -void PLIC_init ( - plic_instance_t * this_plic, - uintptr_t base_addr, - uint32_t num_sources, - uint32_t num_priorities - ); - -void PLIC_set_threshold (plic_instance_t * this_plic, - plic_threshold threshold); - -void PLIC_enable_interrupt (plic_instance_t * this_plic, - plic_source source); - -void PLIC_disable_interrupt (plic_instance_t * this_plic, - plic_source source); - -void PLIC_set_priority (plic_instance_t * this_plic, - plic_source source, - plic_priority priority); - -plic_source PLIC_claim_interrupt(plic_instance_t * this_plic); - -void PLIC_complete_interrupt(plic_instance_t * this_plic, - plic_source source); - -__END_DECLS - -#endif -- cgit v1.2.3