From 0adc37422f48e9468d980a1d98dcc65bd7ab3043 Mon Sep 17 00:00:00 2001 From: Megan Wachs Date: Tue, 31 Jan 2017 20:25:38 -0800 Subject: add a 'driver' common PRCI functions. --- bsp/drivers/fe300prci/fe300prci_driver.c | 187 +++++++++++++++++++++++++++++++ bsp/drivers/fe300prci/fe300prci_driver.h | 54 +++++++++ bsp/env/hifive1.h | 2 + 3 files changed, 243 insertions(+) create mode 100644 bsp/drivers/fe300prci/fe300prci_driver.c create mode 100644 bsp/drivers/fe300prci/fe300prci_driver.h (limited to 'bsp') diff --git a/bsp/drivers/fe300prci/fe300prci_driver.c b/bsp/drivers/fe300prci/fe300prci_driver.c new file mode 100644 index 0000000..3338b81 --- /dev/null +++ b/bsp/drivers/fe300prci/fe300prci_driver.c @@ -0,0 +1,187 @@ +// See LICENSE file for license details + +#include "drivers/fe300prci/fe300prci_driver.h" +#include "platform.h" +#include + +#define rdmcycle(x) { \ + uint32_t lo, hi, hi2; \ + __asm__ __volatile__ ("1:\n\t" \ + "csrr %0, mcycleh\n\t" \ + "csrr %1, mcycle\n\t" \ + "csrr %2, mcycleh\n\t" \ + "bne %0, %2, 1b\n\t" \ + : "=r" (hi), "=r" (lo), "=r" (hi2)) ; \ + *(x) = lo | ((uint64_t) hi << 32); \ + } + +static uint32_t PRCI_measure_mcycle_freq(uint32_t mtime_ticks, uint32_t mtime_freq) +{ + + uint32_t start_mtime = CLINT_REG(CLINT_MTIME); + uint32_t end_mtime = start_mtime + mtime_ticks + 1; + + // Make sure we won't get rollover. + while (end_mtime < start_mtime){ + start_mtime = CLINT_REG(CLINT_MTIME); + end_mtime = start_mtime + mtime_ticks + 1; + } + + // Don't start measuring until mtime edge. + uint32_t tmp = start_mtime; + do { + start_mtime = CLINT_REG(CLINT_MTIME); + } while (start_mtime == tmp); + + uint64_t start_mcycle; + rdmcycle(&start_mcycle); + + while (CLINT_REG(CLINT_MTIME) < end_mtime) ; + + uint64_t end_mcycle; + rdmcycle(&end_mcycle); + uint32_t difference = (uint32_t) (end_mcycle - start_mcycle); + + uint64_t freq = ((uint64_t) difference * mtime_freq) / mtime_ticks; + return (uint32_t) freq & 0xFFFFFFFF; + +} + + +static void PRCI_use_hfrosc(int div, int trim) +{ + // Make sure the HFROSC is running at its default setting + // It is OK to change this even if we are running off of it. + + PRCI_REG(PRCI_HFROSCCFG) = (ROSC_DIV(div) | ROSC_TRIM(trim) | ROSC_EN(1)); + + while ((PRCI_REG(PRCI_HFROSCCFG) & ROSC_RDY(1)) == 0); + + PRCI_REG(PRCI_PLLCFG) &= ~PLL_SEL(1); +} + +static void PRCI_use_pll(int refsel, int bypass, + int r, int f, int q, int finaldiv, + int hfroscdiv, int hfrosctrim) +{ + // Ensure that we aren't running off the PLL before we mess with it. + if (PRCI_REG(PRCI_PLLCFG) & PLL_SEL(1)) { + // Make sure the HFROSC is running at its default setting + PRCI_use_hfrosc(4, 16); + } + + // Set PLL Source to be HFXOSC if available. + uint32_t config_value = 0; + + config_value |= PLL_REFSEL(refsel); + + if (bypass) { + // Bypass + config_value |= PLL_BYPASS(1); + + PRCI_REG(PRCI_PLLCFG) = config_value; + + // If we don't have an HFXTAL, this doesn't really matter. + // Set our Final output divide to divide-by-1: + PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0)); + } else { + + // To overclock, use the hfrosc + if (hfrosctrim >= 0 && hfroscdiv >= 0) { + PRCI_use_hfrosc(hfroscdiv, hfrosctrim); + } + + // Set DIV Settings for PLL + + // (Legal values of f_REF are 6-48MHz) + + // Set DIVR to divide-by-2 to get 8MHz frequency + // (legal values of f_R are 6-12 MHz) + + config_value |= PLL_BYPASS(1); + config_value |= PLL_R(r); + + // Set DIVF to get 512Mhz frequncy + // There is an implied multiply-by-2, 16Mhz. + // So need to write 32-1 + // (legal values of f_F are 384-768 MHz) + config_value |= PLL_F(f); + + // Set DIVQ to divide-by-2 to get 256 MHz frequency + // (legal values of f_Q are 50-400Mhz) + config_value |= PLL_Q(q); + + // Set our Final output divide to divide-by-1: + if (finaldiv == 1){ + PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0)); + } else { + PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV(finaldiv)); + } + + PRCI_REG(PRCI_PLLCFG) = config_value; + + // Un-Bypass the PLL. + PRCI_REG(PRCI_PLLCFG) &= ~PLL_BYPASS(1); + + // Wait for PLL Lock + // Note that the Lock signal can be glitchy. + // Need to wait 100 us + // RTC is running at 32kHz. + // So wait 4 ticks of RTC. + uint32_t now = CLINT_REG(CLINT_MTIME); + while (CLINT_REG(CLINT_MTIME) - now < 4) ; + + // Now it is safe to check for PLL Lock + while ((PRCI_REG(PRCI_PLLCFG) & PLL_LOCK(1)) == 0); + + } + + // Switch over to PLL Clock source + PRCI_REG(PRCI_PLLCFG) |= PLL_SEL(1); +} + +static void PRCI_use_default_clocks() +{ + // Turn off the LFROSC + AON_REG(AON_LFROSC) &= ~ROSC_EN(1); + + // Use HFROSC + PRCI_use_hfrosc(4, 16); +} + +// This is a generic function, which +// doesn't span the entire range of HFROSC settings. +// It only adjusts the trim, which can span a hundred MHz or so. +// This function needs improvement to ensure that the PLL settings +// are legal every step of the way. +// It returns the actual measured CPU frequency. + +uint32_t PRCI_set_hfrosctrim_for_f_cpu(uint32_t f_cpu) +{ + + int hfrosctrim = 16; + PRCI_use_default_clocks(); + PRCI_use_pll(0, 0, 1, 31, 1, 1, 4, 16); + // Ignore the first run (for icache reasons) + uint32_t cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ); + cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ); + + if (cpu_freq > F_CPU) { + while((cpu_freq > F_CPU) && (hfrosctrim >= 0) ){ + PRCI_use_pll(0, 0, 1, 31, 1, 1, 4, hfrosctrim ); + cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ); + hfrosctrim--; + } + return cpu_freq; + } + + while(cpu_freq < F_CPU) { + if (hfrosctrim >= 0x20) { + break; + } + PRCI_use_pll(0, 0, 1, 31, 1, 1, 4, hfrosctrim ); + cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ); + hfrosctrim++; + } + return cpu_freq; +} diff --git a/bsp/drivers/fe300prci/fe300prci_driver.h b/bsp/drivers/fe300prci/fe300prci_driver.h new file mode 100644 index 0000000..052edcb --- /dev/null +++ b/bsp/drivers/fe300prci/fe300prci_driver.h @@ -0,0 +1,54 @@ +// See LICENSE file for license details + +#ifndef _FE300PRCI_DRIVER_H_ +#define _FE300PRCI_DRIVER_H_ + +#include + + +/* Measure and return the approximate frequency of the + * CPU, as given by measuring the mcycle counter against + * the mtime ticks. + */ +static uint32_t PRCI_measure_mcycle_freq(uint32_t mtime_ticks, uint32_t mtime_freq); + +/* Safely switch over to the HFROSC using the given div + * and trim settings. + */ +static void PRCI_use_hfrosc(int div, int trim); + +/* Safely switch over to the PLL using the given + * settings. + * + * Note that not all combinations of the inputs are actually + * legal, and this function does not check for their + * legality ("safely" means that this function won't turn off + * or glitch the clock the CPU is actually running off, but + * doesn't protect against you making it too fast or slow.) + */ + +static void PRCI_use_pll(int refsel, int bypass, + int r, int f, int q, int finaldiv, + int hfroscdiv, int hfrosctrim); + +/* Use the default clocks configured at reset. + * This is ~16Mhz HFROSC and turns off the LFROSC + * (on the current FE310 Dev Platforms, an external LFROSC is + * used as it is more power efficient). + */ +static void PRCI_use_default_clocks(); + +/* This routine will adjust the HFROSC trim + * as the PLL clock source, measure the resulting + * frequency, and attempt to get close to the requested + * frequency. It returns the actual measured frequency. + * + * Note that the requested frequency must be within the + * range supported by the PLL so not all values are + * achievable with this function, and not all + * are guaranteed to actually work. + */ +uint32_t PRCI_set_hfrosctrim_for_f_cpu(uint32_t f_cpu); + +#endif + diff --git a/bsp/env/hifive1.h b/bsp/env/hifive1.h index 11b98f8..4c65f18 100644 --- a/bsp/env/hifive1.h +++ b/bsp/env/hifive1.h @@ -74,6 +74,8 @@ #define HAS_HFXOSC 1 #define HAS_LFROSC_BYPASS 1 +#define RTC_FREQ 32768 + void write_hex(int fd, uint32_t hex); #endif /* _SIFIVE_HIFIVE1_H */ -- cgit v1.2.3