From 6aab6996dbd890c5788bf4e330454a3490268174 Mon Sep 17 00:00:00 2001
From: Nathaniel Graff <nathaniel.graff@sifive.com>
Date: Wed, 6 Mar 2019 13:08:22 -0800
Subject: Add support for Segger J-Link

Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
---
 scripts/debug         | 13 ++++++++++++-
 scripts/standalone.mk | 16 ++++++++++++++++
 scripts/upload        | 17 +++++++++++++++--
 3 files changed, 43 insertions(+), 3 deletions(-)

(limited to 'scripts')

diff --git a/scripts/debug b/scripts/debug
index d02c42c..87068c5 100755
--- a/scripts/debug
+++ b/scripts/debug
@@ -5,6 +5,7 @@ set -o pipefail
 
 unset elf
 unset cfg
+unset jlink
 unset openocd
 unset gdb
 while [[ "$1" != "" ]]
@@ -13,13 +14,14 @@ do
     in
     --elf)                 elf="$2";     shift 2;;
     --openocd)             openocd="$2"; shift 2;;
+    --jlink)               jlink="$2";   shift 2;;
     --openocd-config)      cfg="$2";     shift 2;;
     --gdb)                 gdb="$2";     shift 2;;
     *) echo "$0: Unknown argument $1";   exit 1;;
     esac
 done
 
-if [[ "$elf" == "" ]]
+if [ "$elf" == "" ]
 then
     echo "$0: --elf is required" >&2
     exit 1
@@ -27,8 +29,17 @@ fi
 
 export GDB_PORT=3333
 
+if [ "$jlink" != "" ]
+then
+
+$jlink -device RISC-V -port $GDB_PORT &
+
+else
+
 $openocd -f $cfg &
 
+fi
+
 $gdb $elf -ex "set remotetimeout 240" -ex "target extended-remote localhost:${GDB_PORT}"
 
 kill %1
diff --git a/scripts/standalone.mk b/scripts/standalone.mk
index e80e0c1..921d6a1 100644
--- a/scripts/standalone.mk
+++ b/scripts/standalone.mk
@@ -54,6 +54,7 @@ ifeq ($(RISCV_PATH),)
 RISCV_GCC     := $(CROSS_COMPILE)-gcc
 RISCV_GXX     := $(CROSS_COMPILE)-g++
 RISCV_OBJDUMP := $(CROSS_COMPILE)-objdump
+RISCV_OBJCOPY := $(CROSS_COMPILE)-objcopy
 RISCV_GDB     := $(CROSS_COMPILE)-gdb
 RISCV_AR      := $(CROSS_COMPILE)-ar
 RISCV_SIZE    := $(CROSS_COMPILE)-size
@@ -61,12 +62,16 @@ else
 RISCV_GCC     := $(abspath $(RISCV_PATH)/bin/$(CROSS_COMPILE)-gcc)
 RISCV_GXX     := $(abspath $(RISCV_PATH)/bin/$(CROSS_COMPILE)-g++)
 RISCV_OBJDUMP := $(abspath $(RISCV_PATH)/bin/$(CROSS_COMPILE)-objdump)
+RISCV_OBJCOPY := $(abspath $(RISCV_PATH)/bin/$(CROSS_COMPILE)-objcopy)
 RISCV_GDB     := $(abspath $(RISCV_PATH)/bin/$(CROSS_COMPILE)-gdb)
 RISCV_AR      := $(abspath $(RISCV_PATH)/bin/$(CROSS_COMPILE)-ar)
 RISCV_SIZE    := $(abspath $(RISCV_PATH)/bin/$(CROSS_COMPILE)-size)
 PATH          := $(abspath $(RISCV_PATH)/bin):$(PATH)
 endif
 
+SEGGER_JLINK_EXE := JLinkExe
+SEGGER_JLINK_GDB_SERVER := JLinkGDBServer
+
 #############################################################
 # Software
 #############################################################
@@ -84,6 +89,9 @@ software: $(PROGRAM_ELF)
 ifneq ($(COREIP_MEM_WIDTH),)
 software: $(PROGRAM_HEX)
 endif
+ifneq ($(SEGGER_JLINK_OB),)
+software: $(PROGRAM_HEX)
+endif
 
 PROGRAM_SRCS = $(wildcard $(SRC_DIR)/*.c) $(wildcard $(SRC_DIR)/*.h) $(wildcard $(SRC_DIR)/*.S)
 
@@ -104,6 +112,14 @@ $(PROGRAM_ELF): \
 
 	$(RISCV_SIZE) $@
 
+ifneq ($(SEGGER_JLINK_OB),)
+# If we're using Segger J-Link OB, use objcopy to create an Intel hex file for programming
+$(PROGRAM_HEX): \
+		$(RISCV_OBJCOPY) \
+		$(PROGRAM_ELF)
+	$< -O ihex $(PROGRAM_ELF) $@
+endif
+
 .PHONY: clean-software
 clean-software:
 	$(MAKE) -C $(SRC_DIR) clean
diff --git a/scripts/upload b/scripts/upload
index 66e9ed8..a52fc0a 100755
--- a/scripts/upload
+++ b/scripts/upload
@@ -4,31 +4,44 @@ set -e
 set -o pipefail
 
 unset elf
+unset hex
 unset cfg
 unset openocd
+unset jlink
 unset gdb
 while [[ "$1" != "" ]]
 do
     case "$1"
     in
     --elf)                 elf="$2";     shift 2;;
+    --hex)                 hex="$2";     shift 2;;
     --openocd)             openocd="$2"; shift 2;;
     --openocd-config)      cfg="$2";     shift 2;;
+    --jlink)               jlink="$2";   shift 2;;
     --gdb)                 gdb="$2";     shift 2;;
     *) echo "$0: Unknown argument $1";   exit 1;;
     esac
 done
 
-if [[ "$elf" == "" ]]
+if [ "$elf" == "" -a "$hex" == "" ]
 then
-    echo "$0: --elf is required" >&2
+    echo "$0: --elf or --hex is required" >&2
     exit 1
 fi
 
 export GDB_PORT=3333
 
+if [ "$jlink" != "" ]
+then
+
+echo -e "loadfile $hex\nrnh\nexit" | $jlink -device FE310 -if JTAG -speed 4000 -jtagconf -1,-1 -autoconnect 1
+
+else
+
 $openocd -f $cfg &
 
 $gdb $elf --batch -ex "set remotetimeout 240" -ex "target extended-remote localhost:${GDB_PORT}" -ex "monitor reset halt" -ex "monitor flash protect 0 64 last off" -ex "load" -ex "monitor resume" -ex "monitor shutdown" -ex "quit"
 
 kill %1
+
+fi
-- 
cgit v1.2.1-18-gbd029